Narex Cabinet Scraper Gooseneck 120mm x 70mm x 0.7mm

Narex PREMIUM Gooseneck Profile Cabinet Scraper: Smooth Mouldings, Ogees and Intricate Profiles With One Versatile Tool

Mouldings, ogees and complex curves are some of the hardest surfaces to finish well, because sandpaper rounds over crisp details and a straight or single-curve scraper can't follow a changing shape. Swapping between several tools on one profile slows you down and often leaves uneven spots where the curves don't quite match. The Narex PREMIUM Gooseneck Profile Cabinet Scraper solves this with a flowing swan neck edge that combines tight and gentle curves, so you can find the right section for almost any profile and smooth it cleanly with fine, dust-free shavings.

Add this versatile profile scraper to your bench and bring your mouldings and shaped work to a crisp, clean finish.

Key Features

• Gooseneck (swan neck) profile: The edge flows through a series of curves with different radii, from tight bends to broad, gentle arcs. You can match a section of the edge to the shape you're working on, instead of reaching for a different tool for every curve.
• Reaches complex curves and mouldings: The varied profile fits into coves, beads, ogees and other intricate shapes. It follows changing contours smoothly, so you can finish a whole moulding without catching or skipping spots.
• Tight curves for fine detail: The smaller radii get into narrow hollows, quirks and carved details where sandpaper and larger tools can't reach. You keep control right into the tightest parts of a profile.
• Keeps profiles crisp: The scraper shaves the surface rather than abrading it. Your mouldings, fillets and carved edges keep their sharp lines and true shape.
• Hardened carbon steel blade: Hardened carbon steel takes and holds a crisp burr. Your scraper keeps cutting fine shavings for longer between sharpenings and stands up to years of workshop use.
• Polished surface: The polished faces give you a smooth, true starting point when you prepare the edge. A clean face helps you form an even burr, and an even burr gives a cleaner cut.
• Smooths without tearing the grain: The burr slices the fibres rather than lifting them. It handles figured, curly and interlocked timbers that tend to tear out under edge tools.
• Removes tool marks and old finishes: Clean up marks left by moulding planes, routers or carving tools, or strip old varnish and coatings from shaped parts without clogging sandpaper.
• 0.7mm thickness: The plate flexes enough under your fingers to fine-tune the cut, yet stays stiff enough for heavier jobs such as stripping finishes.
• Compact 120 x 70mm size: The smaller plate sits comfortably in your hands and gets into tight spots on chairs, frames, mouldings and carvings.
• Made by Narex: Narex has decades of experience making quality woodworking hand tools, and this scraper is built to last.

Ideal For

• Furniture makers finishing mouldings, ogees and shaped edges on cabinets, tables and frames.
• Chairmakers smoothing curved rails, spindles and shaped components.
• Carvers refining intricate curves, coves and detailed relief work.
• Restorers stripping old finishes from mouldings and ornate trim on vintage furniture.
• Woodworkers who own flat or curved scrapers and want one tool for more complex profiles.

Specifications

• Product: Narex PREMIUM Gooseneck Profile Cabinet Scraper.
• Blade material: Hardened carbon steel.
• Surface finish: Polished.
• Design: Gooseneck (swan neck).
• Pieces per package: 1.

A quick tip: prepare the curved edges with a fine file or a slipstone, using smooth, rolling strokes that follow each curve so the profile stays even. Lay the scraper flat and rub each face with a burnisher. Then hold the burnisher at about 5 to 10 degrees to the edge and draw it around the curves two or three times to turn the hook. A round or teardrop burnisher makes it easier to reach the tighter sections. To scrape, test a few parts of the edge against your moulding and choose the section that matches best. Tilt the scraper slightly away from you and push or pull along the profile with light, steady pressure. When you see fine shavings, you've got it right. Dust instead of shavings means it's time to turn the burr again.

Add the Narex PREMIUM Gooseneck Profile Cabinet Scraper to your cart today for smooth mouldings, crisp profiles and less time sanding, and craft with confidence.