{"title":"Measuring \u0026 Marking","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-sheets-root=\"1\"\u003e\u003cspan\u003ePrecision begins with accurate measurement and marking. Our collection includes \u003c\/span\u003e\u003cspan\u003e\u003ca class=\"in-cell-link\" href=\"https:\/\/carbatec.myshopify.com\/collections\/marking-cutting-gauges\" target=\"_blank\"\u003emarking and cutting gauges\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e\u003ca class=\"in-cell-link\" href=\"https:\/\/carbatec.myshopify.com\/collections\/squares\" target=\"_blank\"\u003esquares\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e\u003ca class=\"in-cell-link\" href=\"https:\/\/carbatec.myshopify.com\/collections\/rules-tape-measures\" target=\"_blank\"\u003erules\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003e\u003ca class=\"in-cell-link\" href=\"https:\/\/carbatec.myshopify.com\/collections\/rules-tape-measures\" target=\"_blank\"\u003etape measures\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003e\u003ca class=\"in-cell-link\" href=\"https:\/\/carbatec.myshopify.com\/collections\/marking-knives-pencils\" target=\"_blank\"\u003emarking knives\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e to ensure every project starts with confidence. Whether you're laying out intricate joinery or marking straight cuts, our tools help you achieve flawless results every time.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"veritas-striking-knife","title":"Veritas Workshop Striking Knife","description":"\u003cp\u003eLike pencils, there never seems to be a striking knife at hand when you need it. We've produced this high-quality, well-priced knife so you can affordably leave several around your shop.\n\u003cbr\u003eThe knife has an A2 tool-steel blade with a 55° included angle at the tip. Ground to a keen edge at a 25° bevel angle, it slices wood fibers cleanly. It leaves an incised marking line that serves to guide a saw or chisel when starting a cut, helping to improve accuracy.\n\u003cbr\u003eAt less than 1\/32\" thick and 5\/16\" wide, the blade projects about 1 1\/2\" from the handle, making it particularly useful for the precise transfer work required for dovetail layouts. The dual bevel makes it equally comfortable for right- or left-hand use, or marking either side of a reference surface.\n\u003cbr\u003eThe nylon-reinforced ABS handle is contoured for a comfortable, controlled grip, with flats on the sides to provide tactile cues for blade orientation and finger placement. They also prevent the knife from rolling on a surface. Supplied with a guard to protect the tip in storage. 6 5\/8\" long overall.\n\u003cbr\u003eMade in Canada. Excellent value in what should be a shop staple.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815166001427,"sku":"05D20-05","price":46.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05D20-05-veritas-workshop-striking-knife.jpg?v=1705988334"},{"product_id":"inlay-groove-cutter-and-slicing-tool-veritas","title":"Veritas String Inlay Basic System","description":"\u003cp\u003eUsed like a marking gauge, this inlay tool lets you accurately cut narrow grooves in a workpiece as well as neatly slice fine strings from a sheet of veneer. It has an interchangeable blade system that lets you quickly swap blades to suit the activity.\n\u003cbr\u003eThe hook shaped blade is designed to cut grooves. Used in a sweeping push-pull motion, it has outlining spurs on one side of the blade to score the groove edges, and a cutting edge on the other to remove material. The result is a very clean, defined groove with no tear-out.\n\u003cbr\u003eTo slice strings of consistent width, the bevel-edged, spear-point blade is used for cutting in either direction. The blades can be offset up to 3-1\/4\" (82.55mm) from the brass fence (or up to 9-1\/4\" (235mm) with the optional 10\" (254mm) guide rods). Posts projecting from the fence let you pivot the blade into the work when starting a cut, and also serve as limiters to control cut depth (you can remove the posts to attach a custom radiused wooden sub-fence when working with a curved-edge workpiece).\n\u003cbr\u003eBy replacing the cutter head with the optional pencil holder, you can draw a design on your work exactly as it will be cut. In addition to providing a line to follow with the cutter, it serves as a dry run to preview how the design will look on your workpiece. The optional compass centre, used in lieu of the fence, lets the cutter head or pencil holder make circles and arcs with radii from 3\/4\" (19mm) to 3-3\/4\" (95.25mm) (up to 9-3\/4\" (247.65mm) with the 10\" (254mm) rods). \n\u003cbr\u003eWhile not strictly required, using a pin awl (available separately) to define the centre mark for the compass head makes it easy to position the compass on the workpiece.\n\u003cbr\u003eThe basic inlay tool system includes the cutter head, a brass-faced fence and two blades: a 0.032\" groove blade and a slicing blade. An additional cutter head (without blades) can be purchased, letting you keep a second blade ready to quickly switch from grooving to slicing or from one groove size to another. The compass centre and pencil holder are available separately or in combination with the basic system.\n\u003cbr\u003eOptional 0.025\", 0.040\" and 0.062\" groove blades, as well as 10\" long steel guide rods, are available separately. All blades are spring steel (hardened to Rc45-50) and double ended; when one edge dulls they can be flipped to expose a second sharp blade.\n\u003cbr\u003eIncludes: cutter head, a brass-faced fence and two blades: a 0.032\" groove blade and a slicing blade.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815170326803,"sku":"05K11-01","price":211.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05K11-01_2.jpg?v=1702615662"},{"product_id":"compass-centre-veritas","title":"Veritas String Inlay Tool System - Compass only","description":"\u003cp\u003eThe optional compass center for the Veritas string inlay tool system, used in lieu of the fence, lets the cutter head or pencil holder make circles and arcs with radii from 3\/4\" to 3 3\/4\" (up to 9 3\/4\" with the 10\" rods). While not strictly required, using a pin awl (available separately) to define the center mark for the compass head makes it easy to position the compass on the workpiece.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815170392339,"sku":"05K11-02","price":39.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05K11-02-compass-center-only.jpg?v=1705988464"},{"product_id":"pencil-holder-veritas","title":"Veritas String Inlay Tool System - Pencil Holder Only","description":"\u003cp\u003eBy replacing the cutter head with the optional pencil holder, you can draw a design on your work exactly as it will be cut. In addition to providing a line to follow with the cutter, it serves as a dry run to preview how the design will look on your workpiece.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815170425107,"sku":"05K11-03","price":53.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05K11-03-pencil-holder-only.jpg?v=1705988468"},{"product_id":"veritas-10-inch-rods-for-veritas-string-inlay-tool-system","title":"Veritas 10\" Rods for Veritas String Inlay Tool System","description":"\u003cp\u003eIncrease the capacity of the Veritas® String Inlay Tool System by replacing the standard rods with these 10” options. This changes the offset from 3-1\/4\" to a massive 9-1\/4\".\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815170457875,"sku":"05K11-04","price":17.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05K11-04-veritas-10-inch-rods-for-veritas-string-inlay-tool-system.jpg?v=1705988471"},{"product_id":"inlay-groove-blade-040-for-05k11-01-veritas","title":"Veritas® Optional Groove Blade - 0.040\" (1.016mm) to suit String Inlay Tool System","description":"\u003cp\u003eMade from Spring Steel, these Replacement Optional Groove Blades allow the user to create super fine inlays usually with a contrasting coloured timber. This is difficult to do accurately using any other method.\n\u003cbr\u003eWhen one edge dulls they can be flipped to expose a second sharp blade.\n\u003cbr\u003eWidth 1.016mm\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815170556179,"sku":"05K11-13","price":42.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05K11-13-opt-groove-blade-0-040-inch.jpg?v=1705988475"},{"product_id":"2pce-dovetail-marker-1-8-1-6-veritas-05n10-11","title":"Veritas 1:6 \u0026 1:8 Dovetail Markers (Set of Two)","description":"\u003cp\u003eFor quick, accurate marking of dovetails, a dovetail marker is the best tool available.\n\u003cbr\u003eWith riding ledges on both sides, these 2\" × 2\" markers can be flipped over to mark both slopes of the dovetail. They are designed so that the entire ledge is riding on the reference face, even when marking edge dovetails. The relieved corners at the join of the body and the riding ledges ensure perfect seating even on saw whiskers. Made from anodized aluminum, these markers are light, durable and never soil your work.\n\u003cbr\u003eAvailable as a set in the traditional ratios of 1:6 for softwood and 1:8 for hardwood. The 14° marker is designed to approximate a 1:4 ratio, for those who prefer this angle when working in thinner stock, as it not only provides stronger material interlock than traditional ratio angles but produces a slightly exaggerated dovetail joint that many find attractive.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815172587795,"sku":"05N10-11","price":33.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N10-11.jpg?v=1702615691"},{"product_id":"14deg-dovetail-marker-veritas-05n10-13","title":"Veritas 14° Dovetail Marker","description":"\u003cp\u003eFor quick and accurate marking of dovetails, a guide is the best way to go. The Veritas Dovetail Markers are designed to be large enough to cater for most sized dovetails, and able to flipped over to allow both slopes of the dovetail to be marked. Their design allows the front face of the dovetail to be referenced from the top mark, eliminating any guess work. Made from aluminium, they are light and will not damage the timber. The 14° angle is traditionally used in blind dovetails, when making drawers, so the joints are hidden from the front.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815172817171,"sku":"05N10-13","price":18.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N10-13.jpg?v=1702615693"},{"product_id":"centre-marker-veritas","title":"Veritas Centre Marker","description":"\u003cp\u003eAs with many of our Veritas tools, we were led to develop the center marker because such a tool didn't exist.\n\u003cbr\u003eWe looked at numerous center-finding devices over the years in an attempt to find one that did the job well, with the least amount of effort on your part. All of them required three hands to use since you had to hold the wood, the finder, and a pencil all at once. We were convinced that it was possible to give you a simple-to-use tool that would also be much more accurate than any previous system. This is it.\n\u003cbr\u003eMade from die-cast aluminum (predrilled for mounting near your lathe), it uses a knife-edged steel blade to score the end of a workpiece. You set a square or cylinder (up to 6\" across) in the marker, tap it with a mallet, turn the wood approximately 90° and tap it again. The result is two score lines that intersect at the exact center of the wood. In softwoods the lines are deep enough to hold the drive center directly; you won't need to make additional intersecting saw cuts in the drive end of your workpiece.\n\u003cbr\u003eThis marker even functions well with work that is not square or cylindrical. In such a case, score the end of your workpiece four times rather than twice. This will give you a small polygon; you can dot the center of it by eye. Guaranteed to be accurate within 5 arc minutes (or 1\/12 of a degree). With any center finder that does not automatically mark the wood, you are always out by at least half the width of your pencil line, plus whatever other error is inherent in the tool. Most of them have no guarantees of accuracy at all.\n\u003cbr\u003eThis tool particularly shines when work has to be replaced on the lathe after waste ends have been removed. Because it is so accurate, you can re-establish the exact center of any cylinder. This is the best center marker available.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815172948243,"sku":"05N15-01","price":64.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N15-01-veritas-center-marker.jpg?v=1705988569"},{"product_id":"9-caliper-reverse-0-140mm-lee-valley","title":"Lee Valley Thickness Calipers - 9\"","description":"\u003cp\u003ePrimarily used by turners, these thickness calipers can be fitted into virtually any shape of vase or bowl.\n\u003cbr\u003eTo use, open the caliper by just pulling the legs apart (having the spacing nut between the legs rather than outside them allows this), put in position and then set the spacing nut to the wall thickness. Open calipers, remove and measure tip gap.\n\u003cbr\u003eThe spacing nut can be adjusted for any thickness from 0mm(0\") to 140mm(5 1\/2\") on the 230mm(9\") model. The respective throat depths (from nut to tip) is 140mm(5 1\/2\"). These are equally good for dimensional take-offs of almost any oddly shaped object. Steel with brass fittings.\n\u003cbr\u003eMade in France for Lee Valley.\u003c\/p\u003e","brand":"LEE VALLEY","offers":[{"title":"Default Title","offer_id":47815172981011,"sku":"05N22-01","price":125.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N22-01-9-inch-thickness-caliper.jpg?v=1705988568"},{"product_id":"bar-gauge-set-veritas","title":"Veritas Bar Gauge","description":"\u003cp\u003eUsing a bar gauge lets you directly transfer and compare dimensions without conversion to numbers, reducing the chance of transcription errors. You can even use it to quickly test an assembly for squareness by checking that the diagonals are equal.\n\u003cbr\u003eThe base unit consists of two 6\" steel rods fixed to aluminum clamp heads. The rods have threaded end holes that accept interchangeable brass tips or extension rods.\n\u003cbr\u003eThree styles of tips are included: ball tips for inside measurements (the rounded ends avoid marring softwood), pointed tips for inside corner measurements and 13\/16\" diameter mushroom-shaped tips to hook over edges for outside measurements. The distance between the ends of the round or pointed tips is equal to the distance between the inside faces of the mushroom-shaped tips, letting you convert an inside measurement to an outside measurement just by switching tips. The clamp heads have large thumbscrews and slide easily for quick adjustment. The base unit adjusts from 7 1\/2\" to 12\". Two pairs of extension rods are included, 4\" and 12\", allowing a span up to 44\". For greater reach, additional 12\" extension rods are available separately.\n\u003cbr\u003eA 1 3\/8\" diameter mushroom-shaped tip is also available separately. It provides a larger reference face when hooking over edges for outside measurements but is reversible for inside measurements.\n\u003cbr\u003eA fast, reliable way to get a true measurement. Made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173013779,"sku":"05N29-01","price":157.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N29-01.jpg?v=1702615699"},{"product_id":"12-bar-gauge-extension-rods-pair-veritas","title":"Veritas Additional 12\" Bar Gauge Extension Rods","description":"\u003cp\u003eThis pair of 12\" extension rods can be used to extend the reach of the Veritas bar gauge, Veritas beam compass, or Veritas marking and transfer tool.\n\u003cbr\u003eIt can also be used with the fence and center kit for the Veritas plunge base for rotary tools or the fence and center kit for compact routers, in order to extend the reach of the fence. The rods have a male thread at one end and a female thread at the other.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173046547,"sku":"05N29-06","price":34.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N29-06_2.jpg?v=1702615700"},{"product_id":"sliding-square-metric-veritas","title":"Veritas Sliding Square","description":"\u003cp\u003eThis cabinetmaker's square is used to lay out or transfer measurements quickly and accurately - you always have an ample reference face against your workpiece without having to flip the square. This also simplifies working in two axes at once (eg; measuring in 50mm and over 38mm); substantially reducing the chance of error when measuring and marking two dimensions.\n\u003cbr\u003eThe stainless steel blade is 77mm wide and 152mm long and is machine ground on all four edges. The rule is graduated to 100mm along both edges and across one end to 70mm. The diamond cutout in the blade holds a pencil tip in position and makes it easy to draw lines parallel to an edge.\n\u003cbr\u003eThe locking mechanism has a notched pin like those on combination squares; with the blade bearing on polished; hardened steel reference pins set in the body. Accurate and well made. Weight: 317g.\n\u003cbr\u003eSliding squares made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173144851,"sku":"05N32-05","price":91.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N32-05.jpg?v=1702615700"},{"product_id":"bar-gauge-heads-for-3-4-sto-veritas","title":"Veritas Bar Gauge Heads","description":"\u003cp\u003eSimple bar gauges are among the most useful tools in a shop. Much like cabinet scrapers, once you have used them, you wonder how you got along without them.\n\u003cbr\u003eThey have two primary purposes, comparing measurements (such as ensuring equal diagonals in drawers or carcasses to guarantee squareness) and transferring measurements.\n\u003cbr\u003eAny time you can transfer a dimension directly, without converting it into numbers, you avoid a primary source of error.\n\u003cbr\u003eBar gauges not only shine in basic measurement transfer, but are unequalled for inside measurements, such as for sizing shelves or interior trim in windows. They can also be used as \"story sticks\" for complex built-ins where nothing is square.\n\u003cbr\u003eGauge head openings are 1\/2\" × 3\/4\"; you just rip 1\/4\" slices off standard 3\/4\" lumber to make bars of the length you want (wood is not included). Made of brass and ABS plastic. Two brass pins are included for transferring inside or outside measurements smaller than the length of the sticks or for transferring outside measurements without making hook tips.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173177619,"sku":"05N31-01","price":36.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N31-01-bar-gauge-heads.jpg?v=1705988578"},{"product_id":"standard-wheel-gauge","title":"Veritas Wheel Marking Gauge","description":"\u003cp\u003eThere are two main problems with a typical marking gauge: you have to tilt it just right to avoid pin chatter and, even then, the pin tends to follow the wood grain, throwing off your line. Our wheel marking gauge solves both problems.\n\u003cbr\u003eThe hardened steel wheel cutter scribes perfectly at any point of its circumference. Since it cuts wood fibers rather than tears, it marks cleanly, even on cross grain. The wheel's single-sided bevel also pulls the gauge face against the stock, maintaining accuracy. Its cutting edge is at the extreme end of the rod, useful for transferring dimensions such as tenon shoulder and mortice depth. The wheel retracts into the face of the gauge for storage and protection. The gauges are very easy to set, since each has an internal O-ring to keep light but constant friction on the rod. A very comfortable gauge to use.\n\u003cbr\u003eA great workhorse and excellent value.\n\u003cbr\u003ePatented. Made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173341459,"sku":"05N33-21","price":77.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N33-21-standard-wheel-marking-gauge-plain-rod.jpg?v=1705988578"},{"product_id":"standard-wheel-gauge-imperial","title":"Veritas Wheel Marking Gauge - Imperial","description":"\u003cp\u003eYet another handy measuring tool no workshop should be without. Traditional marking gauges use a sharpened pin to mark a line. These can follow the grain, so not always give an accurate mark. The Veritas Wheel Marking Gauge with Imperial graduations uses a sharpened wheel to slice the grain rather than depress it. The cutter wheel is at the end of the bar, and has a recess in the face of the gauge for safe storage when not in use. With the cutter at the end of the bar, measuring the depth of a mortice and being able to then transfer this measurement accurately is now possible. The bevel of the cutter pulls the gauge into the timber rather than allowing it to wander away, again another little feature by Veritas making for an easy and pleasurable tool to use.The Imperial gauge has graduations in 1\/16” intervals along the 6” bar.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173374227,"sku":"05N33-22","price":75.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N33-22.jpg?v=1702615701"},{"product_id":"precision-square-metric","title":"Veritas Precision Square - Metric","description":"\u003cp\u003eA tool so versatile, it will quickly become one of those tools you cannot do without. It is small enough that it will be useful for many woodworking projects, and tool or machine setup, and has a high degree of accuracy (0.001\" per inch of length).All edges are ground, and both faces are graduated on the inside and outside edges. Useful for general layout and checking whether surfaces are flat or straight, as well as for machine set-up, since it lets you measure and check for square on the same plane. Made from chrome-plated high-carbon steel, they can be marked upon with pencil for convenience, with the relieved interior corner ensures that the square seats well, even over saw whiskers.The Metric square is graduated in half millimetres on the 8cm leg and in millimetres on the 15cm leg. Legs are 20mm wide. Made in USA.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173472531,"sku":"05N35-03","price":95.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N35-03.jpg?v=1702615708"},{"product_id":"marking-gauge-micro-adj-veritas","title":"Veritas Micro Adjustable Wheel Marking Gauge","description":"\u003cp\u003eOur standard wheel marking gauge is a great workhorse and excellent value. Its popularity led to the development of a second model that incorporates a micro-adjust feature. It is similar to our standard wheel marking gauge with an anodized aluminum body, brass face, stainless-steel rod and internal O-ring to keep a constant light friction force on the rod. It differs in that the body is slightly longer and is fitted with a two-stage collet that allows micro-adjustment of the cutting wheel. The collet has a fine-pitch thread; one revolution advances or retracts the wheel 1\/32\", a half turn 1\/64\", a quarter turn 1\/128\", etc. The knurled thumbscrew then locks the setting.\n\u003cbr\u003eThe hardened steel wheel cuts wood fibers rather than tears them, which leaves a clean mark, even on cross grain. The wheel’s single-sided bevel also forces the gauge face against the stock, maintaining accuracy. The cutting edge of the wheel is at the extreme end of the shaft, which is useful for transferring dimensions such as tenon shoulder or mortice depth. The wheel retracts into the face of the gauge for storage.Made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173505299,"sku":"05N35-10","price":89.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N35-10-standard-micro-adjust-marking-gauge.jpg?v=1705988585"},{"product_id":"wheel-cutter-replacement-veritas","title":"Veritas® Replacement Wheel for Marking Gauges","description":"\u003cp\u003eReplacement wheel for the Veritas standard wheel marking gauge.\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e05N33-21 \u003cbr\u003e05N35-10 \u003cbr\u003e05N35-20 \u003cbr\u003e05N65-01 \u003cbr\u003e05N35-21\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173538067,"sku":"05N35-11","price":11.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N35-11-repl-wheel-for-above-gauges.jpg?v=1705988586"},{"product_id":"micro-adjust-gauge-imperial","title":"Veritas® Imperial Micro-Adjust Gauge","description":"\u003cp\u003eOur standard wheel marking gauge is a great workhorse and excellent value. Its popularity led to the development of a second model that incorporates a micro-adjust feature. It is similar to our standard wheel marking gauge with an anodized aluminum body, brass face, stainless-steel rod and internal O-ring to keep a constant light friction force on the rod. It differs in that the body is slightly longer and is fitted with a two-stage collet that allows micro-adjustment of the cutting wheel. The collet has a fine-pitch thread; one revolution advances or retracts the wheel 1\/32\", a half turn 1\/64\", a quarter turn 1\/128\", etc. The knurled thumbscrew then locks the setting.\n\u003cbr\u003eThe hardened steel wheel cuts wood fibers rather than tears them, which leaves a clean mark, even on cross grain. The wheel’s single-sided bevel also forces the gauge face against the stock, maintaining accuracy. The cutting edge of the wheel is at the extreme end of the shaft, which is useful for transferring dimensions such as tenon shoulder or mortice depth. The wheel retracts into the face of the gauge for storage.\n\u003cbr\u003eThe gauge is available with either an unmarked rod or a graduated rod. The rod of the Imperial gauge is graduated to 6\" in 16ths; the metric version has graduations to 150mm. Patented.Made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173603603,"sku":"05N35-20","price":98.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N35-20.jpg?v=1702615711"},{"product_id":"micro-adjust-gauge-metric","title":"Veritas® Metric Graduated Marking Gauge","description":"\u003cp\u003eOur standard wheel marking gauge is a great workhorse and excellent value. Its popularity led to the development of a second model that incorporates a micro-adjust feature. It is similar to our standard wheel marking gauge with an anodized aluminum body, brass face, stainless-steel rod and internal O-ring to keep a constant light friction force on the rod. It differs in that the body is slightly longer and is fitted with a two-stage collet that allows micro-adjustment of the cutting wheel. The collet has a fine-pitch thread; one revolution advances or retracts the wheel 1\/32\", a half turn 1\/64\", a quarter turn 1\/128\", etc. The knurled thumbscrew then locks the setting.\n\u003cbr\u003eThe hardened steel wheel cuts wood fibers rather than tears them, which leaves a clean mark, even on cross grain. The wheel’s single-sided bevel also forces the gauge face against the stock, maintaining accuracy. The cutting edge of the wheel is at the extreme end of the shaft, which is useful for transferring dimensions such as tenon shoulder or mortice depth. The wheel retracts into the face of the gauge for storage.\n\u003cbr\u003eThe gauge is available with either an unmarked rod or a graduated rod. The rod of the Imperial gauge is graduated to 6\" in 16ths; the metric version has graduations to 150mm. Patented.Made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173767443,"sku":"05N35-21","price":99.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N35-21-micro-adjust-gauge-metric.jpg?v=1705988593"},{"product_id":"carpenters-gauge-veritas","title":"Veritas Carpenter Gauge","description":"\u003cp\u003eSpecifically designed to be carried in an apron or pocket, this is both a direct-reading compass and a marking gauge, two things that carpenters frequently need but find hard to carry. It has a rotatable head, which locks vertically for use and horizontally for storage and tip protection. It is direct reading, for both radius and diameter, in inches and centimetres.\n\u003cbr\u003eIf you have ever measured a dryer vent pipe at 5 7\/16\" diameter and needed to cut a hole for it, you'll know why direct-setting diameters are such an advantage. Similarly, if you have ever had to put a radius on a corner, you know why a combination compass\/marking gauge is so valuable. You set your radius, locate the center using the gauge, then rotate the head and scribe your line with the compass. The gauge is also useful in a cabinet shop because of the direct-reading feature (substantially reduces errors), as well as for the fast corner radiusing just described.\n\u003cbr\u003eMade of brass, stainless steel and high-impact ABS, it is 7 1\/2\" long overall, and will scribe circles up to 12\" diameter.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173800211,"sku":"05N36-01","price":57.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05n36-01.jpg?v=1702615714"},{"product_id":"veritas-micro-adjustable-wheel-marking-gauge-new-model","title":"Veritas Micro-adjust Wheel Marking Gauge","description":"\u003cp\u003eThis micro-adjust wheel-marking gauge draws on two decades of manufacturing experience, with many refinements and subtle improvements over our previous gauges. \u003cbr\u003eThe adjustment mechanism built into the stainless-steel rod is intuitive to use. After setting the approximate projection, you can fine-tune the position of the cutter within a range of 1\/4\". A fine-pitch internal thread allows slow, careful adjustment, so setting the gauge precisely is a snap. \u003cbr\u003eLocking knobs keep the setting from shifting in use. The eccentric placement of the rod through the brass face and aluminum body ensures a large reference surface for square registration on the stock and helps the gauge resist rolling on a bench top. \u003cbr\u003eOf course, the core of the marking gauge is still the hardened steel wheel cutter, which solves the two main problems of a pin-based marking gauge – the need to tilt it just right to avoid chatter, and the tendency of the pin to follow the wood grain, throwing off your line. It scribes perfectly at any point of its circumference, cutting neat marks even on cross grain. \u003cbr\u003eThe wheel's single-sided bevel also pulls the gauge face against the stock, helping to maintain accuracy. Its cutting edge is at the extreme end of the rod, useful for transferring dimensions such as tenon shoulder and mortice depth and retracts into a hollow in the gauge face for protection.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173832979,"sku":"05N36-31","price":118.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N36-31-veritas-micro-adjust-wheel-marking-gauge.jpg?v=1705988596"},{"product_id":"veritas-set-of-3-edge-rules-150mm-300mm-and-450mm","title":"Set of 3 Veritas Metric Edge Rules","description":"\u003cp\u003e• Clever design allows easy edge-to-face transfer marking\n\u003cbr\u003e• Accurately marks dowel rod or other radiused surfaces\n\u003cbr\u003e• Bevelled edge prevents parallax errors when measuring and marking\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173865747,"sku":"05N46-50","price":94.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N46-50-1.jpg?v=1705988602"},{"product_id":"veritas-150mm-edge-rule","title":"Veritas 150mm Metric Edge Rule","description":"\u003cp\u003e• Clever design allows easy edge-to-face transfer marking\n\u003cbr\u003e• Accurately marks dowel rod or other radiused surfaces\n\u003cbr\u003e• Bevelled edge prevents parallax errors when measuring and marking\n\u003cbr\u003e• Short leg is 9.5mm deep\n\u003cbr\u003e• Long leg is 19mm deep\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173898515,"sku":"05N46-61","price":21.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N46-61-1.jpg?v=1705988607"},{"product_id":"veritas-300mm-edge-rule","title":"Veritas 300mm Metric Edge Rule","description":"\u003cp\u003e• Clever design allows easy edge-to-face transfer marking\n\u003cbr\u003e• Accurately marks dowel rod or other radiused surfaces\n\u003cbr\u003e• Bevelled edge prevents parallax errors when measuring and marking\n\u003cbr\u003e• Short leg is 9.5mm deep\n\u003cbr\u003e• Long leg is 19mm deep\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173931283,"sku":"05N46-62","price":31.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N46-62-1.jpg?v=1705988609"},{"product_id":"veritas-450mm-edge-rule","title":"Veritas 450mm Metric Edge Rule","description":"\u003cp\u003e• Clever design allows easy edge-to-face transfer marking\n\u003cbr\u003e• Accurately marks dowel rod or other radiused surfaces\n\u003cbr\u003e• Bevelled edge prevents parallax errors when measuring and marking\n\u003cbr\u003e• Short leg is 11mm deep\n\u003cbr\u003e• Long leg is 25mm deep\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173964051,"sku":"05N46-63","price":42.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N46-63-1.jpg?v=1705988609"},{"product_id":"beam-compass-heads-carry-tube-veritas","title":"Veritas Beam Compass Heads","description":"\u003cp\u003eUsing a regular compass for small circles is OK, but for projects involving large circles or arcs, our beam compass heads are ideal.\n\u003cbr\u003eThe aluminum heads clamp onto a piece of wood from 5\/8\" to 3\/4\" thick, creating a compass whose radius is limited only by the length of stock you have at hand. Each brass clamping knob holds the head securely to the beam using a trapped pin that prevents pivoting and shifting. The pins withdraw as the clamping knob is backed off. The heads need only be clamped approximately as one of the points has an eccentric tip that can be used to achieve 1\/8\" of fine adjustment. Both points have been hardened and can be used to mark hard surfaces such as steel plate, sheet metal or aluminum.\n\u003cbr\u003eAlso included is a small pencil for marking wood and wallboard. The heads, points and pencil all pack into the slim tubular hard-shell case for storage in a toolbox.\n\u003cbr\u003eA simple yet highly useful layout tool.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174029587,"sku":"05N50-01","price":123.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N50-01-beam-compass-heads.jpg?v=1705988610"},{"product_id":"saddle-square-marking-gauge-veritas","title":"Veritas Saddle Square Marking Gauge","description":"\u003cp\u003eTransferring a line from one surface to another perpendicular surface with a small square is never easy. Our saddle square solves this problem by allowing you to scribe two perpendicular surfaces at a time. It also lets you pick up on a line already scribed and accurately transfer it to another face perpendicular to it.\n\u003cbr\u003eTry continuing this line around all 4 faces and you'll see how far off you can be. This saddle square solves the problem by allowing you to scribe two perpendicular surfaces at a time. More importantly; it allows you to pick up on a line already scribed, and accurately transfer it to another face perpendicular to it. With 1-1\/4inch and 2-1\/4inch inside legs; it can be used to wrap a line around workpieces up to almost double this. Made of anodized aluminum; 2inch wide; with both end faces machined square to within 0.25 of a degree.\n\u003cbr\u003ePatented. Made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174160659,"sku":"05N56-01","price":34.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N56-01-veritas-saddle-square.jpg?v=1705988616"},{"product_id":"mitre-saddle-marking-gauge-veritas","title":"Veritas Mitre Saddle","description":"\u003cp\u003eWhen working on small items such as picture frames, a large combination square or try square can often be cumbersome. Not so with our miter saddle. The relatively small size makes it easy to use.\n\u003cbr\u003eDespite its size, it still has a large reference face (3 1\/2\" at the wide end) set at 45°. The leg measures 1\" wide by 2 1\/4\" long. As with our saddle squares, the sides are machined so that a line can be easily and accurately transferred around workpiece corners. With the miter saddle, however, a right-angle line on one surface is transferred as a 45° angle on the adjoining surface, or vice versa. This way, a line for a miter cut can be wrapped around all surfaces precisely and will meet perfectly at the corners. The inside corner is relieved to ensure perfect registration, even on saw whiskers.\n\u003cbr\u003eMade from anodized aluminum, this marker is light and durable, and will never mark your work.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174193427,"sku":"05N56-15","price":39.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N56-15-veritas-miter-saddle.jpg?v=1705988616"},{"product_id":"metric-set-up-blocks","title":"Veritas Metric Set-up Blocks - 9 Piece Set","description":"\u003cp\u003e• Easy to use setup blocks.\n\u003cbr\u003e• Metric sizes for convenience.\n\u003cbr\u003e• Wide range of sizes to cover most applications.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174258963,"sku":"05N58-12","price":118.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N58-12.jpg?v=1705988621"},{"product_id":"square-fence-for-rules-veritas","title":"Veritas Square Fence","description":"\u003cp\u003eA carpenter's square is frequently needed just because of its size. The key disadvantage of such a square (its lack of a supporting fence ledge) can now be eliminated using a Veritas square fence.\n\u003cbr\u003eThe 8\" long anodized aluminum extrusion can be readily attached to either the stock or blade of your square (depending upon intended use) with the two integral brass screws. The face of the square fence aligns with the edge of the workpiece while the weight of the framing square rests on the material.\n\u003cbr\u003eOne side offers a 1\" high face. Flipping it over, the opposite side has a 1\/4\" face, letting you use it on workpieces this thin without having to slide them to the edge of your workbench. Its purposeful shape not only acts as a versatile fence, but also gives your framing square a handle, hugely increasing its utility. Ideal for use on round-edge material and sheet stock. Made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174291731,"sku":"05N54-01","price":57.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N54-01-veritas-square-fence.jpg?v=1705988614"},{"product_id":"dovetail-saddle-1-6-guide-veritas","title":"Veritas 1:6 Dovetail Saddle Square","description":"\u003cp\u003eFor quick, accurate marking of dovetails, a dovetail marker is the best tool available.\n\u003cbr\u003eOur dovetail saddle markers are precision machined at 1:6 and 1:8 angles, the traditional angles for softwood and hardwood dovetails respectively. The new 14° marker is designed to approximate a 1:4 ratio, for those who prefer this angle when working in thinner stock, as it not only provides stronger material interlock than traditional ratio angles but produces a slightly exaggerated dovetail joint that many find attractive.\n\u003cbr\u003eThe long legs ensure accurate registration. Also, much like the Veritas saddle square they are based on, they allow a continuous line to be transferred around the corner, so the straight and angled lines can be scribed at the same time, ensuring perfect alignment. The inside corner is relieved to ensure flush seating even on saw whiskers.\n\u003cbr\u003eMade from anodized aluminum, these markers are light and durable, and will never mark your work.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174357267,"sku":"05N61-04","price":33.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N61-04-1-6-dovetail-saddle-marker.jpg?v=1705988621"},{"product_id":"dovetail-square-1-8-guide-veritas","title":"Veritas 1:8 Dovetail Saddle Square","description":"\u003cp\u003eFor quick, accurate marking of dovetails, a dovetail marker is the best tool available.\n\u003cbr\u003eOur dovetail saddle markers are precision machined at 1:6 and 1:8 angles, the traditional angles for softwood and hardwood dovetails respectively. The new 14° marker is designed to approximate a 1:4 ratio, for those who prefer this angle when working in thinner stock, as it not only provides stronger material interlock than traditional ratio angles but produces a slightly exaggerated dovetail joint that many find attractive.\n\u003cbr\u003eThe long legs ensure accurate registration. Also, much like the Veritas saddle square they are based on, they allow a continuous line to be transferred around the corner, so the straight and angled lines can be scribed at the same time, ensuring perfect alignment. The inside corner is relieved to ensure flush seating even on saw whiskers.\n\u003cbr\u003eMade from anodized aluminum, these markers are light and durable, and will never mark your work.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174324499,"sku":"05N61-05","price":33.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N61-05-1-8-dovetail-saddle-marker.jpg?v=1705988623"},{"product_id":"14deg-dovetail-saddle-marker-veritas","title":"Veritas 14° Dovetail Saddle Marker","description":"\u003cp\u003eFor quick, accurate marking of dovetails, a dovetail marker is the best tool available.\n\u003cbr\u003eOur dovetail saddle markers are precision machined at 1:6 and 1:8 angles, the traditional angles for softwood and hardwood dovetails respectively. The new 14° marker is designed to approximate a 1:4 ratio, for those who prefer this angle when working in thinner stock, as it not only provides stronger material interlock than traditional ratio angles but produces a slightly exaggerated dovetail joint that many find attractive.\n\u003cbr\u003eThe long legs ensure accurate registration. Also, much like the Veritas saddle square they are based on, they allow a continuous line to be transferred around the corner, so the straight and angled lines can be scribed at the same time, ensuring perfect alignment. The inside corner is relieved to ensure flush seating even on saw whiskers.\n\u003cbr\u003eMade from anodized aluminum, these markers are light and durable, and will never mark your work.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174521107,"sku":"05N61-08","price":33.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N61-08-14-dovetail-saddle-marker.jpg?v=1705988623"},{"product_id":"steel-straightedge-304mm-12-veritas","title":"Veritas Steel Straightedge - 12\"","description":"\u003cp\u003eShop accuracy begins with a benchmark straightedge as a surface reference. These Canadian-made precision steel straightedges are ground flat over the entire length on both edges, the 12\" length to within 0.0010\" and the 24\" and 36\" lengths to within 0.0015\". All have been stress relieved to remain true under temperature variation. Useful for checking whether surfaces are flat or straight, they are 1 1\/2\" high and their width allows them to easily stand on edge unsupported, leaving both hands free for precise measurement or tool adjustment. All have hang holes, allowing storage on a nail or hook.\n\u003cbr\u003eAt just over 1 lb and 1\/4\" thick, the 12\" straightedge is a handy size for checking things such as plane soles or water stones for flatness. It is also a good choice anywhere a larger straightedge would be unwieldy in use or would risk damaging the item being checked.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174553875,"sku":"05N62-00","price":102.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N62-00.jpg?v=1702615719"},{"product_id":"steel-straightedge-607mm-24-veritas","title":"Veritas Steel Straightedge - 24\"","description":"\u003cp\u003eShop accuracy begins with a benchmark straightedge as a surface reference. These Canadian-made precision steel straightedges are ground flat over the entire length on both edges, the 12\" length to within 0.0010\" and the 24\" and 36\" lengths to within 0.0015\". All have been stress relieved to remain true under temperature variation. Useful for checking whether surfaces are flat or straight, they are 1 1\/2\" high and their width allows them to easily stand on edge unsupported, leaving both hands free for precise measurement or tool adjustment. All have hang holes, allowing storage on a nail or hook.\n\u003cbr\u003eAn invaluable aid for machine set-up, the 24\" straightedge is a good size for setting up stationary machines such as planers and jointers. At slightly more than 2 lb, it weighs enough to stay in place while you make adjustments. 1\/4\" thick.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174586643,"sku":"05N62-01","price":146.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N62-01.jpg?v=1702615720"},{"product_id":"steel-straightedge-914mm-36-veritas","title":"Veritas Steel Straightedge - 36\"","description":"\u003cp\u003eShop accuracy begins with a benchmark straightedge as a surface reference. These Canadian-made precision steel straightedges are ground flat over the entire length on both edges, the 12\" length to within 0.0010\" and the 24\" and 36\" lengths to within 0.0015\". All have been stress relieved to remain true under temperature variation. Useful for checking whether surfaces are flat or straight, they are 1 1\/2\" high and their width allows them to easily stand on edge unsupported, leaving both hands free for precise measurement or tool adjustment. All have hang holes, allowing storage on a nail or hook.\n\u003cbr\u003eGreat for long-bed jointer and larger machine set-up, the 36\" straightedge is a good master shop reference. Weighing a substantial 5 3\/4 lb, it is 3\/8\" thick. The linished sides give a textured surface that makes the straightedge easier to grip with confidence.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174619411,"sku":"05N62-03","price":228.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N62-03.jpg?v=1702615721"},{"product_id":"aluminum-straightedge-18-inch","title":"Veritas Aluminium Straight Edge - 457mm (18\")","description":"\u003cp\u003eMachined accurately.Will not rust.Hole provided for hanging.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174652179,"sku":"05N63-00","price":68.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N63-00-18-inch-aluminum-straightedge.jpg?v=1705988629"},{"product_id":"aluminium-straight-607mm-24-veritas","title":"Veritas Aluminium Straightedge - 607mm","description":"\u003cp\u003eMachined accurately.Will not rust.Hole provided for hanging.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174684947,"sku":"05N63-01","price":81.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N63-01.jpg?v=1702615726"},{"product_id":"aluminium-straight-965mm-38-veritas","title":"Veritas Aluminium Straightedge - 965mm","description":"\u003cp\u003eMachined accurately.Will not rust.Hole provided for hanging.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174717715,"sku":"05N63-03","price":114.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N63-03-38-inch-aluminum-straightedge.jpg?v=1705988631"},{"product_id":"3-in-1-marking-gauge-brass-veritas","title":"Veritas Three In One Marking Gauge","description":"\u003cp\u003eThis elegant marking gauge is really three tools in one — a wheel gauge, a pin gauge and a cutting gauge.\n\u003cbr\u003eThe unique swivelling pin\/blade chuck takes either a pin or a blade that locks in place (after extension is set) using a set screw in the end of the 4 1\/2\" gauge stem. The cutting blade can be set for either right- or left-handed use. The opposite end of the stem is tapped to accept a 3\/8\" diameter wheel cutter.\n\u003cbr\u003eThe fence and the internal portion of the locking collet are a single eccentric brass turning. The collet fingers have just enough stem friction to hold a projection setting while you lock it in place with a half turn of the knurled locking sleeve. The 1\" diameter fence is eccentric to maximize rub depth. A side benefit is that it also prevents the gauge from rolling off the workbench.\n\u003cbr\u003eComes complete with a dozen spare blades, two hardened steel pins, a wheel cutter and screw, and a hex key. Extra stems available separately for those who prefer to switch heads as quickly as possible.\n\u003cbr\u003eMade in Canada. Patented.\n\u003cbr\u003eAn excellent tool that is a great buy.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174750483,"sku":"05N65-01","price":71.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N65-01.jpg?v=1702615727"},{"product_id":"ruler-stop-veritas","title":"Veritas Ruler Stop","description":"\u003cp\u003eThe Veritas ruler stop increases the usefulness of a metal ruler by providing a solid reference point. It is ideal for setting saw fences, repeat cuts, etc.\n\u003cbr\u003eTo use, slide the stop over the ruler end and tighten it at the desired position. The notched post at the tip of the brass adjustment screw allows even the thinnest rulers to be clamped securely; it will not mar the ruler edge. Repositioning is fast and easy. The stop's anodized aluminum body is contoured to fit comfortably between thumb and forefinger, with raised ridges for a better grip.\n\u003cbr\u003eAccommodates rulers from 1\" to 1 1\/8\" wide and up to 0.05\" thick, the typical dimensions of rulers in the 12\" to 24\" length range. At 1\" wide by about 2 1\/4\" long (including the adjustment screw), this tool is as compact as it is useful.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174848787,"sku":"05N68-01","price":36.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N68-01.jpg?v=1702615728"},{"product_id":"bevel-setter-0-60deg-metric-veritas","title":"Veritas Bevel Setter with Metric Rule","description":"\u003cp\u003eA sliding bevel is an excellent tool for transferring angles but not for reading them.\n\u003cbr\u003eThis bevel setter lets you set specific angles (from 0° to 60° in 1\/2° increments) on a sliding bevel or a workpiece as well as read angles already set. Both functions are useful for dovetailing, for machine set-up, for polygon work, or for accurately fitting a piece in a restricted location. Common dovetail and polygon angles are highlighted on the reverse side.\n\u003cbr\u003eThe etched stainless-steel blade is 3\" wide and 7\" long. It is both easier to use and more accurate than a protractor in the same applications.\n\u003cbr\u003eMade in Canada. Patented.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174881555,"sku":"05N66-03","price":81.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N66-03-bevel-setter-w-metric-rule.jpg?v=1705988637"},{"product_id":"dual-marking-gauge-veritas","title":"Veritas Dual Marking Gauge","description":"\u003cp\u003e• Dual adjustable rods\n\u003cbr\u003e• Cutting wheels fitted with opposing bevels assist with marking\n\u003cbr\u003e• 145mm projection\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174914323,"sku":"05N70-01","price":125.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N70-01_2.jpg?v=1702615729"},{"product_id":"wheel-cutter-replacement-outside-dual-marking","title":"Veritas Replacement Outside Cutter to suit Dual Marking Gauge","description":"\u003cp\u003eHardened steel replacement wheel cutter for the Veritas Dual Marking Gauge and Micro-Adjust Wheel Marking Gauge. Outside orientation.\n\u003cbr\u003eUsed to cut fibres on timber when doing joints such as mortices and tenons, the bevels are designed to provide the relief on the correct side of the line for the chisel. Use the outside cutter, positioned on the end of the steel shaft to measure the depth of a mortice to transfer this to tenon, ready for cutting.\n\u003cbr\u003eCutter C\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174947091,"sku":"05N70-02","price":12.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N70-02.jpg?v=1702615733"},{"product_id":"wheel-cutter-replacement-inside-dual-marking","title":"Veritas Replacement Inside Cutter to suit Dual Marking Gauge","description":"\u003cp\u003eHardened steel replacement wheel cutter for the Veritas dual marking gauge. Inside orientation.\n\u003cbr\u003eUsed to cut fibres on timber when doing joints such as mortices and tenons, the bevels are designed to provide the relief on the correct side of the line for the chisel. Use the outside cutter, positioned on the end of the steel shaft to measure the depth of a mortice to transfer this to tenon, ready for cutting.\n\u003cbr\u003eCutter D\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815175012627,"sku":"05N70-03","price":12.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N70-03.jpg?v=1702615734"},{"product_id":"shaft-clamp-for-dual-marking-gauge","title":"Veritas® Shaft Clamp to suit Dual Marking Gauge","description":"\u003cp\u003eDesigned to fit onto the Veritas dual marking gauge's guide rods, this shaft clamp lets you lock the relative position of the cutters while still being able to freely adjust the fence for offset. This allows you to preserve identical mortice or tenon sizing when joining parts of different thicknesses or when adding a reveal, since it prevents the cutter settings from shifting while the fence is being repositioned.\n\u003cbr\u003eMachined to precise tolerances to prevent binding on the rods, the 1\/2\" long collar is made from extruded aluminum, with a turned brass thumbscrew that tightens onto the marking gauge's steel guide rods without marring their surfaces.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815175045395,"sku":"05N70-05","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N70-05.jpg?v=1702615735"},{"product_id":"veritas-drill-stop-gauge-imperial-metric","title":"Veritas Drill Stop Gauge","description":"\u003cp\u003eSecurely holds drill bit while you set your drill stopSupports drills up to 1” (25mm) in diameterDual readout: Up to 3” or up to 80mm\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815175078163,"sku":"05N77-01","price":18.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N77-01-1.jpg?v=1705988649"},{"product_id":"dovetail-saw-for-magnet-guide-veritas","title":"Veritas Dovetail Saw","description":"\u003cp\u003eThis saw was designed specifically for use with our saw guides. With a 2\" × 8 1\/2\", 22 tpi blade, the dozuki tooth form is effective in both crosscuts and rip cuts. Patented.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815191036179,"sku":"05T02-03","price":68.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05T02-03-veritas-dovetail-saw.jpg?v=1705989083"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/collections\/CSQ-1625_600x600_c5b0d394-1834-41df-8793-08bfdd4c4e28.jpg?v=1753752695","url":"https:\/\/mycarbateflash.com\/collections\/measuring-marking.oembed","provider":"Carbatec","version":"1.0","type":"link"}