{"title":"Marking \u0026 Cutting Gauges","description":"","products":[{"product_id":"inlay-groove-cutter-and-slicing-tool-veritas","title":"Veritas String Inlay Basic System","description":"\u003cp\u003eUsed like a marking gauge, this inlay tool lets you accurately cut narrow grooves in a workpiece as well as neatly slice fine strings from a sheet of veneer. It has an interchangeable blade system that lets you quickly swap blades to suit the activity.\n\u003cbr\u003eThe hook shaped blade is designed to cut grooves. Used in a sweeping push-pull motion, it has outlining spurs on one side of the blade to score the groove edges, and a cutting edge on the other to remove material. The result is a very clean, defined groove with no tear-out.\n\u003cbr\u003eTo slice strings of consistent width, the bevel-edged, spear-point blade is used for cutting in either direction. The blades can be offset up to 3-1\/4\" (82.55mm) from the brass fence (or up to 9-1\/4\" (235mm) with the optional 10\" (254mm) guide rods). Posts projecting from the fence let you pivot the blade into the work when starting a cut, and also serve as limiters to control cut depth (you can remove the posts to attach a custom radiused wooden sub-fence when working with a curved-edge workpiece).\n\u003cbr\u003eBy replacing the cutter head with the optional pencil holder, you can draw a design on your work exactly as it will be cut. In addition to providing a line to follow with the cutter, it serves as a dry run to preview how the design will look on your workpiece. The optional compass centre, used in lieu of the fence, lets the cutter head or pencil holder make circles and arcs with radii from 3\/4\" (19mm) to 3-3\/4\" (95.25mm) (up to 9-3\/4\" (247.65mm) with the 10\" (254mm) rods). \n\u003cbr\u003eWhile not strictly required, using a pin awl (available separately) to define the centre mark for the compass head makes it easy to position the compass on the workpiece.\n\u003cbr\u003eThe basic inlay tool system includes the cutter head, a brass-faced fence and two blades: a 0.032\" groove blade and a slicing blade. An additional cutter head (without blades) can be purchased, letting you keep a second blade ready to quickly switch from grooving to slicing or from one groove size to another. The compass centre and pencil holder are available separately or in combination with the basic system.\n\u003cbr\u003eOptional 0.025\", 0.040\" and 0.062\" groove blades, as well as 10\" long steel guide rods, are available separately. All blades are spring steel (hardened to Rc45-50) and double ended; when one edge dulls they can be flipped to expose a second sharp blade.\n\u003cbr\u003eIncludes: cutter head, a brass-faced fence and two blades: a 0.032\" groove blade and a slicing blade.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815170326803,"sku":"05K11-01","price":211.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05K11-01_2.jpg?v=1702615662"},{"product_id":"compass-centre-veritas","title":"Veritas String Inlay Tool System - Compass only","description":"\u003cp\u003eThe optional compass center for the Veritas string inlay tool system, used in lieu of the fence, lets the cutter head or pencil holder make circles and arcs with radii from 3\/4\" to 3 3\/4\" (up to 9 3\/4\" with the 10\" rods). While not strictly required, using a pin awl (available separately) to define the center mark for the compass head makes it easy to position the compass on the workpiece.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815170392339,"sku":"05K11-02","price":39.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05K11-02-compass-center-only.jpg?v=1705988464"},{"product_id":"pencil-holder-veritas","title":"Veritas String Inlay Tool System - Pencil Holder Only","description":"\u003cp\u003eBy replacing the cutter head with the optional pencil holder, you can draw a design on your work exactly as it will be cut. In addition to providing a line to follow with the cutter, it serves as a dry run to preview how the design will look on your workpiece.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815170425107,"sku":"05K11-03","price":53.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05K11-03-pencil-holder-only.jpg?v=1705988468"},{"product_id":"veritas-10-inch-rods-for-veritas-string-inlay-tool-system","title":"Veritas 10\" Rods for Veritas String Inlay Tool System","description":"\u003cp\u003eIncrease the capacity of the Veritas® String Inlay Tool System by replacing the standard rods with these 10” options. This changes the offset from 3-1\/4\" to a massive 9-1\/4\".\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815170457875,"sku":"05K11-04","price":17.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05K11-04-veritas-10-inch-rods-for-veritas-string-inlay-tool-system.jpg?v=1705988471"},{"product_id":"inlay-groove-blade-040-for-05k11-01-veritas","title":"Veritas® Optional Groove Blade - 0.040\" (1.016mm) to suit String Inlay Tool System","description":"\u003cp\u003eMade from Spring Steel, these Replacement Optional Groove Blades allow the user to create super fine inlays usually with a contrasting coloured timber. This is difficult to do accurately using any other method.\n\u003cbr\u003eWhen one edge dulls they can be flipped to expose a second sharp blade.\n\u003cbr\u003eWidth 1.016mm\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815170556179,"sku":"05K11-13","price":42.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05K11-13-opt-groove-blade-0-040-inch.jpg?v=1705988475"},{"product_id":"standard-wheel-gauge","title":"Veritas Wheel Marking Gauge","description":"\u003cp\u003eThere are two main problems with a typical marking gauge: you have to tilt it just right to avoid pin chatter and, even then, the pin tends to follow the wood grain, throwing off your line. Our wheel marking gauge solves both problems.\n\u003cbr\u003eThe hardened steel wheel cutter scribes perfectly at any point of its circumference. Since it cuts wood fibers rather than tears, it marks cleanly, even on cross grain. The wheel's single-sided bevel also pulls the gauge face against the stock, maintaining accuracy. Its cutting edge is at the extreme end of the rod, useful for transferring dimensions such as tenon shoulder and mortice depth. The wheel retracts into the face of the gauge for storage and protection. The gauges are very easy to set, since each has an internal O-ring to keep light but constant friction on the rod. A very comfortable gauge to use.\n\u003cbr\u003eA great workhorse and excellent value.\n\u003cbr\u003ePatented. Made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173341459,"sku":"05N33-21","price":77.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N33-21-standard-wheel-marking-gauge-plain-rod.jpg?v=1705988578"},{"product_id":"standard-wheel-gauge-imperial","title":"Veritas Wheel Marking Gauge - Imperial","description":"\u003cp\u003eYet another handy measuring tool no workshop should be without. Traditional marking gauges use a sharpened pin to mark a line. These can follow the grain, so not always give an accurate mark. The Veritas Wheel Marking Gauge with Imperial graduations uses a sharpened wheel to slice the grain rather than depress it. The cutter wheel is at the end of the bar, and has a recess in the face of the gauge for safe storage when not in use. With the cutter at the end of the bar, measuring the depth of a mortice and being able to then transfer this measurement accurately is now possible. The bevel of the cutter pulls the gauge into the timber rather than allowing it to wander away, again another little feature by Veritas making for an easy and pleasurable tool to use.The Imperial gauge has graduations in 1\/16” intervals along the 6” bar.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173374227,"sku":"05N33-22","price":75.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N33-22.jpg?v=1702615701"},{"product_id":"marking-gauge-micro-adj-veritas","title":"Veritas Micro Adjustable Wheel Marking Gauge","description":"\u003cp\u003eOur standard wheel marking gauge is a great workhorse and excellent value. Its popularity led to the development of a second model that incorporates a micro-adjust feature. It is similar to our standard wheel marking gauge with an anodized aluminum body, brass face, stainless-steel rod and internal O-ring to keep a constant light friction force on the rod. It differs in that the body is slightly longer and is fitted with a two-stage collet that allows micro-adjustment of the cutting wheel. The collet has a fine-pitch thread; one revolution advances or retracts the wheel 1\/32\", a half turn 1\/64\", a quarter turn 1\/128\", etc. The knurled thumbscrew then locks the setting.\n\u003cbr\u003eThe hardened steel wheel cuts wood fibers rather than tears them, which leaves a clean mark, even on cross grain. The wheel’s single-sided bevel also forces the gauge face against the stock, maintaining accuracy. The cutting edge of the wheel is at the extreme end of the shaft, which is useful for transferring dimensions such as tenon shoulder or mortice depth. The wheel retracts into the face of the gauge for storage.Made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173505299,"sku":"05N35-10","price":89.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N35-10-standard-micro-adjust-marking-gauge.jpg?v=1705988585"},{"product_id":"wheel-cutter-replacement-veritas","title":"Veritas® Replacement Wheel for Marking Gauges","description":"\u003cp\u003eReplacement wheel for the Veritas standard wheel marking gauge.\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e05N33-21 \u003cbr\u003e05N35-10 \u003cbr\u003e05N35-20 \u003cbr\u003e05N65-01 \u003cbr\u003e05N35-21\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173538067,"sku":"05N35-11","price":11.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N35-11-repl-wheel-for-above-gauges.jpg?v=1705988586"},{"product_id":"micro-adjust-gauge-imperial","title":"Veritas® Imperial Micro-Adjust Gauge","description":"\u003cp\u003eOur standard wheel marking gauge is a great workhorse and excellent value. Its popularity led to the development of a second model that incorporates a micro-adjust feature. It is similar to our standard wheel marking gauge with an anodized aluminum body, brass face, stainless-steel rod and internal O-ring to keep a constant light friction force on the rod. It differs in that the body is slightly longer and is fitted with a two-stage collet that allows micro-adjustment of the cutting wheel. The collet has a fine-pitch thread; one revolution advances or retracts the wheel 1\/32\", a half turn 1\/64\", a quarter turn 1\/128\", etc. The knurled thumbscrew then locks the setting.\n\u003cbr\u003eThe hardened steel wheel cuts wood fibers rather than tears them, which leaves a clean mark, even on cross grain. The wheel’s single-sided bevel also forces the gauge face against the stock, maintaining accuracy. The cutting edge of the wheel is at the extreme end of the shaft, which is useful for transferring dimensions such as tenon shoulder or mortice depth. The wheel retracts into the face of the gauge for storage.\n\u003cbr\u003eThe gauge is available with either an unmarked rod or a graduated rod. The rod of the Imperial gauge is graduated to 6\" in 16ths; the metric version has graduations to 150mm. Patented.Made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173603603,"sku":"05N35-20","price":98.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N35-20.jpg?v=1702615711"},{"product_id":"micro-adjust-gauge-metric","title":"Veritas® Metric Graduated Marking Gauge","description":"\u003cp\u003eOur standard wheel marking gauge is a great workhorse and excellent value. Its popularity led to the development of a second model that incorporates a micro-adjust feature. It is similar to our standard wheel marking gauge with an anodized aluminum body, brass face, stainless-steel rod and internal O-ring to keep a constant light friction force on the rod. It differs in that the body is slightly longer and is fitted with a two-stage collet that allows micro-adjustment of the cutting wheel. The collet has a fine-pitch thread; one revolution advances or retracts the wheel 1\/32\", a half turn 1\/64\", a quarter turn 1\/128\", etc. The knurled thumbscrew then locks the setting.\n\u003cbr\u003eThe hardened steel wheel cuts wood fibers rather than tears them, which leaves a clean mark, even on cross grain. The wheel’s single-sided bevel also forces the gauge face against the stock, maintaining accuracy. The cutting edge of the wheel is at the extreme end of the shaft, which is useful for transferring dimensions such as tenon shoulder or mortice depth. The wheel retracts into the face of the gauge for storage.\n\u003cbr\u003eThe gauge is available with either an unmarked rod or a graduated rod. The rod of the Imperial gauge is graduated to 6\" in 16ths; the metric version has graduations to 150mm. Patented.Made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173767443,"sku":"05N35-21","price":99.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N35-21-micro-adjust-gauge-metric.jpg?v=1705988593"},{"product_id":"veritas-micro-adjustable-wheel-marking-gauge-new-model","title":"Veritas Micro-adjust Wheel Marking Gauge","description":"\u003cp\u003eThis micro-adjust wheel-marking gauge draws on two decades of manufacturing experience, with many refinements and subtle improvements over our previous gauges. \u003cbr\u003eThe adjustment mechanism built into the stainless-steel rod is intuitive to use. After setting the approximate projection, you can fine-tune the position of the cutter within a range of 1\/4\". A fine-pitch internal thread allows slow, careful adjustment, so setting the gauge precisely is a snap. \u003cbr\u003eLocking knobs keep the setting from shifting in use. The eccentric placement of the rod through the brass face and aluminum body ensures a large reference surface for square registration on the stock and helps the gauge resist rolling on a bench top. \u003cbr\u003eOf course, the core of the marking gauge is still the hardened steel wheel cutter, which solves the two main problems of a pin-based marking gauge – the need to tilt it just right to avoid chatter, and the tendency of the pin to follow the wood grain, throwing off your line. It scribes perfectly at any point of its circumference, cutting neat marks even on cross grain. \u003cbr\u003eThe wheel's single-sided bevel also pulls the gauge face against the stock, helping to maintain accuracy. Its cutting edge is at the extreme end of the rod, useful for transferring dimensions such as tenon shoulder and mortice depth and retracts into a hollow in the gauge face for protection.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815173832979,"sku":"05N36-31","price":118.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N36-31-veritas-micro-adjust-wheel-marking-gauge.jpg?v=1705988596"},{"product_id":"3-in-1-marking-gauge-brass-veritas","title":"Veritas Three In One Marking Gauge","description":"\u003cp\u003eThis elegant marking gauge is really three tools in one — a wheel gauge, a pin gauge and a cutting gauge.\n\u003cbr\u003eThe unique swivelling pin\/blade chuck takes either a pin or a blade that locks in place (after extension is set) using a set screw in the end of the 4 1\/2\" gauge stem. The cutting blade can be set for either right- or left-handed use. The opposite end of the stem is tapped to accept a 3\/8\" diameter wheel cutter.\n\u003cbr\u003eThe fence and the internal portion of the locking collet are a single eccentric brass turning. The collet fingers have just enough stem friction to hold a projection setting while you lock it in place with a half turn of the knurled locking sleeve. The 1\" diameter fence is eccentric to maximize rub depth. A side benefit is that it also prevents the gauge from rolling off the workbench.\n\u003cbr\u003eComes complete with a dozen spare blades, two hardened steel pins, a wheel cutter and screw, and a hex key. Extra stems available separately for those who prefer to switch heads as quickly as possible.\n\u003cbr\u003eMade in Canada. Patented.\n\u003cbr\u003eAn excellent tool that is a great buy.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174750483,"sku":"05N65-01","price":71.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N65-01.jpg?v=1702615727"},{"product_id":"dual-marking-gauge-veritas","title":"Veritas Dual Marking Gauge","description":"\u003cp\u003e• Dual adjustable rods\n\u003cbr\u003e• Cutting wheels fitted with opposing bevels assist with marking\n\u003cbr\u003e• 145mm projection\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174914323,"sku":"05N70-01","price":125.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N70-01_2.jpg?v=1702615729"},{"product_id":"wheel-cutter-replacement-outside-dual-marking","title":"Veritas Replacement Outside Cutter to suit Dual Marking Gauge","description":"\u003cp\u003eHardened steel replacement wheel cutter for the Veritas Dual Marking Gauge and Micro-Adjust Wheel Marking Gauge. Outside orientation.\n\u003cbr\u003eUsed to cut fibres on timber when doing joints such as mortices and tenons, the bevels are designed to provide the relief on the correct side of the line for the chisel. Use the outside cutter, positioned on the end of the steel shaft to measure the depth of a mortice to transfer this to tenon, ready for cutting.\n\u003cbr\u003eCutter C\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174947091,"sku":"05N70-02","price":12.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N70-02.jpg?v=1702615733"},{"product_id":"wheel-cutter-replacement-inside-dual-marking","title":"Veritas Replacement Inside Cutter to suit Dual Marking Gauge","description":"\u003cp\u003eHardened steel replacement wheel cutter for the Veritas dual marking gauge. Inside orientation.\n\u003cbr\u003eUsed to cut fibres on timber when doing joints such as mortices and tenons, the bevels are designed to provide the relief on the correct side of the line for the chisel. Use the outside cutter, positioned on the end of the steel shaft to measure the depth of a mortice to transfer this to tenon, ready for cutting.\n\u003cbr\u003eCutter D\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815175012627,"sku":"05N70-03","price":12.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N70-03.jpg?v=1702615734"},{"product_id":"shaft-clamp-for-dual-marking-gauge","title":"Veritas® Shaft Clamp to suit Dual Marking Gauge","description":"\u003cp\u003eDesigned to fit onto the Veritas dual marking gauge's guide rods, this shaft clamp lets you lock the relative position of the cutters while still being able to freely adjust the fence for offset. This allows you to preserve identical mortice or tenon sizing when joining parts of different thicknesses or when adding a reveal, since it prevents the cutter settings from shifting while the fence is being repositioned.\n\u003cbr\u003eMachined to precise tolerances to prevent binding on the rods, the 1\/2\" long collar is made from extruded aluminum, with a turned brass thumbscrew that tightens onto the marking gauge's steel guide rods without marring their surfaces.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815175045395,"sku":"05N70-05","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N70-05.jpg?v=1702615735"},{"product_id":"mortise-gauge-heads-optional-for-05n35-10-veritas","title":"Veritas Optional Marking\/Mortise Gauge Heads","description":"\u003cp\u003eThough designed for use with our Veritas Wheel Marking Gauges, these gauge heads are a simple retrofit for any marking gauge with a 5\/16\" diameter shaft.\n\u003cbr\u003eMade from carbon steel, the 5\/8\" diameter wheel cutters will scribe at any point in their circumference and slice rather than tear fibers for clean, accurate cuts. The single-bevel cutters are usable in-line for marking parallel lines, or with bevels facing for sure mortice sizing and chisel registration. Secured with integral set screws, the blades can be set as close as 3\/8\" apart. The included shaft collar registers against the marking gauge fence to ensure the shaft remains parallel to the workpiece, preventing accidental tilting of the cutters in use; this is especially useful when scribing large offsets from the fence.\n\u003cbr\u003eSupplied as a pair of cutters with a shaft collar, hex key and instructions. Made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815196573971,"sku":"15N01-01","price":39.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/15N01-01-marking-mortise-gauge-heads.jpg?v=1705989165"},{"product_id":"rockler-3-in-1-bar-gauge","title":"Rockler 3-in-1 Bar Gauge","description":"\u003cp\u003eScribe arcs using the Beam compass\/trammel points tip setQuickly check and transfer diagonals and internal measurements Fits 3\/8'' diameter wooden dowels or metal rods (not included)Durable aluminium bodyMaximum range is determined by rod lengthLarge knurled knobs for easy adjustments\u003c\/p\u003e","brand":"ROCKLER","offers":[{"title":"Default Title","offer_id":47815689797907,"sku":"RK-53052","price":82.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/RK-53052.jpg?v=1702620840"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/collections\/05N65-01-3-in-1-brass-marking-gauge_2.jpg?v=1753752751","url":"https:\/\/mycarbateflash.com\/collections\/marking-cutting-gauges.oembed","provider":"Carbatec","version":"1.0","type":"link"}