{"title":"Leigh Dovetail Jigs and Accessories","description":"","products":[{"product_id":"dovetail-bit","title":"Leigh Through Dovetail Bit - 8° - 1\/2\" shank diameter","description":"\u003cp\u003eLeigh jigs come standard with a selection of router bits. These are designed for doing joints in commonly used timber, between 12mm and 20mm.\n\u003cbr\u003eTo do dovetails in material outside these thicknesses, an additional dovetail bit it needed, for materials up to 20mm. For materials from 20mm to 32mm, a combination of straight bit and dovetail bit are required.\n\u003cbr\u003eMost of these bits have 8mm shank, which provide far greater strength than 1\/4\" shanked bits. There are exceptions to this, these are indicated, and require a large guide bush.\n\u003cbr\u003eLGH-100 can route dovetails into material from 25.4mm to 31.75mm, to be used with LGH-150, this is also an optional extra bit. This has an OD of 20.5mm (13\/16\").\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815635632403,"sku":"LGH-100","price":38.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-100.jpg?v=1702619567"},{"product_id":"dovetail-bit-12deg","title":"Leigh Half Blind Dovetail Bit - 12°","description":"\u003cp\u003eHalf blind dovetails are generally done for drawers where mechanical function of the dovetails are hidden when the drawer is pushed closed. Like dovetails, drawers have been made have been made this way for centuries.\n\u003cbr\u003eOn a dovetail jig, the tails and pins are cut at the same time with the two pieces clamped into the jig at 90° to each other.\n\u003cbr\u003eThe router bit selected should have a depth of cut at least 3mm less than the thickness of the timber being routed. This will determine the bit angle. For rabbeted drawers, the bit selected should have a depth of cut less that the rebate.\n\u003cbr\u003eLeigh offers five half-blind bits to suit board thicknesses from 12.7mm to 22.2mm or greater.\n\u003cbr\u003eHalf-Blind Dovetail Bit Selection\n\u003cbr\u003eBit selection is based on the thickness material used. Ideally, select the cutter with the deepest depth of cut possible, that is less than the thickness of the material.\n\u003cbr\u003eEach blind dovetail bit has a different angle, yet the same diameter of 12.7mm (1\/2”), however each has a different depth of cut.\n\u003cbr\u003eThe below information advises the depth of cut for both single pass and variably spaced blind dovetails, and the depth of cut for the router bit. To get a tighter or looser fit, the router bit needs to be adjusted up or down, rather than the jig being adjusted.\u003c\/p\u003e\n\n\u003cp\u003eLGH-80-8 8° Variably Spaced Dovetails 19mm \/ Single Pass Blind Dovetails 10.7mm Diameter 1\/2” OD, Router bit depth of cut 19.05mm (3\/4”)\n\u003cbr\u003eLGH-101-8 10° Variably Spaced Dovetails 15.8mm \/ Single Pass Blind Dovetails 9.1mm Diameter 1\/2” OD, Router bit depth of cut 15.9mm (5\/8”)\n\u003cbr\u003eLGH-112-8 12° Variably Spaced Dovetails 12.7mm \/ Single Pass Blind Dovetails 7.5mm Diameter 1\/2” OD, Router bit depth of cut 12.7mm (1\/2”)\n\u003cbr\u003eLGH-120-8 14° Variably Spaced Dovetails 11.1mm \/ Single Pass Blind Dovetails 6.35mm Diameter 1\/2” OD, Router bit depth of cut 11.1mm (7\/16”)\n\u003cbr\u003eLGH-128-8 18° Variably Spaced Dovetails 9.5mm \/ Single Pass Blind Dovetails 4.75mm Diameter 1\/2” OD, Router bit depth of cut 9.5mm (3\/8”)\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815635665171,"sku":"LGH-112-8","price":33.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-112-8.jpg?v=1702619571"},{"product_id":"leigh-dovetail-cutter-10deg","title":"Leigh Half-Blind Dovetail Bit - 10°","description":"\u003cp\u003eHalf blind dovetails are generally done for drawers where mechanical function of the dovetails are hidden when the drawer is pushed closed. Like dovetails, drawers have been made have been made this way for centuries.\n\u003cbr\u003eOn a dovetail jig, the tails and pins are cut at the same time with the two pieces clamped into the jig at 90° to each other.\n\u003cbr\u003eThe router bit selected should have a depth of cut at least 3mm less than the thickness of the timber being routed. This will determine the bit angle. For rabbeted drawers, the bit selected should have a depth of cut less that the rebate.\n\u003cbr\u003eLeigh offers five half-blind bits to suit board thicknesses from 12.7mm to 22.2mm or greater.\n\u003cbr\u003eHalf-Blind Dovetail Bit Selection\n\u003cbr\u003eBit selection is based on the thickness material used. Ideally, select the cutter with the deepest depth of cut possible, that is less than the thickness of the material.\n\u003cbr\u003eEach blind dovetail bit has a different angle, yet the same diameter of 12.7mm (1\/2\"), however each has a different depth of cut.\n\u003cbr\u003eThe below information advises the depth of cut for both single pass and variably spaced blind dovetails, and the depth of cut for the router bit. To get a tighter or looser fit, the router bit needs to be adjusted up or down, rather than the jig being adjusted.\u003c\/p\u003e\n\n\u003cp\u003eLGH-80-8 8° Variably Spaced Dovetails 19mm \/ Single Pass Blind Dovetails 10.7mm Diameter 1\/2” OD, Router bit depth of cut 19.05mm (3\/4\")\n\u003cbr\u003eLGH-101-8 10° Variably Spaced Dovetails 15.8mm \/ Single Pass Blind Dovetails 9.1mm Diameter 1\/2” OD, Router bit depth of cut 15.9mm (5\/8\")\n\u003cbr\u003eLGH-112-8 12° Variably Spaced Dovetails 12.7mm \/ Single Pass Blind Dovetails 7.5mm Diameter 1\/2” OD, Router bit depth of cut 12.7mm (1\/2\")\n\u003cbr\u003eLGH-120-8 14° Variably Spaced Dovetails 11.1mm \/ Single Pass Blind Dovetails 6.35mm Diameter 1\/2” OD, Router bit depth of cut 11.1mm (7\/16\")\n\u003cbr\u003eLGH-128-8 18° Variably Spaced Dovetails 9.5mm \/ Single Pass Blind Dovetails 4.75mm Diameter 1\/2” OD, Router bit depth of cut 9.5mm (3\/8\")\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815635697939,"sku":"LGH-101-8","price":33.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-101-8.jpg?v=1702619570"},{"product_id":"leigh-dovetail-cutter-14deg","title":"Leigh Half-Blind Dovetail Bit - 14°","description":"\u003cp\u003eHalf blind dovetails are generally done for drawers where mechanical function of the dovetails are hidden when the drawer is pushed closed. Like dovetails, drawers have been made have been made this way for centuries.\n\u003cbr\u003eOn a dovetail jig, the tails and pins are cut at the same time with the two pieces clamped into the jig at 90° to each other.\n\u003cbr\u003eThe router bit selected should have a depth of cut at least 3mm less than the thickness of the timber being routed. This will determine the bit angle. For rabbeted drawers, the bit selected should have a depth of cut less that the rebate.\n\u003cbr\u003eLeigh offers five half-blind bits to suit board thicknesses from 12.7mm to 22.2mm or greater.\n\u003cbr\u003eHalf-Blind Dovetail Bit Selection\n\u003cbr\u003eBit selection is based on the thickness material used. Ideally, select the cutter with the deepest depth of cut possible, that is less than the thickness of the material.\n\u003cbr\u003eEach blind dovetail bit has a different angle, yet the same diameter of 12.7mm (1\/2”), however each has a different depth of cut.\n\u003cbr\u003eThe below information advises the depth of cut for both single pass and variably spaced blind dovetails, and the depth of cut for the router bit. To get a tighter or looser fit, the router bit needs to be adjusted up or down, rather than the jig being adjusted.\u003c\/p\u003e\n\n\u003cp\u003eLGH-80-8 8° Variably Spaced Dovetails 19mm \/ Single Pass Blind Dovetails 10.7mm Diameter 1\/2” OD, Router bit depth of cut 19.05mm (3\/4”)\n\u003cbr\u003eLGH-101-8 10° Variably Spaced Dovetails 15.8mm \/ Single Pass Blind Dovetails 9.1mm Diameter 1\/2” OD, Router bit depth of cut 15.9mm (5\/8”)\n\u003cbr\u003eLGH-112-8 12° Variably Spaced Dovetails 12.7mm \/ Single Pass Blind Dovetails 7.5mm Diameter 1\/2” OD, Router bit depth of cut 12.7mm (1\/2”)\n\u003cbr\u003eLGH-120-8 14° Variably Spaced Dovetails 11.1mm \/ Single Pass Blind Dovetails 6.35mm Diameter 1\/2” OD, Router bit depth of cut 11.1mm (7\/16”)\n\u003cbr\u003eLGH-128-8 18° Variably Spaced Dovetails 9.5mm \/ Single Pass Blind Dovetails 4.75mm Diameter 1\/2” OD, Router bit depth of cut 9.5mm (3\/8”)\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815635763475,"sku":"LGH-120-8","price":33.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-120-8.jpg?v=1702619571"},{"product_id":"leigh-dovetail-cutter-18deg","title":"Leigh Half-Blind Dovetail Bit - 18°","description":"\u003cp\u003eHalf blind dovetails are generally done for drawers where mechanical function of the dovetails are hidden when the drawer is pushed closed. Like dovetails, drawers have been made have been made this way for centuries.\n\u003cbr\u003eOn a dovetail jig, the tails and pins are cut at the same time with the two pieces clamped into the jig at 90° to each other.\n\u003cbr\u003eThe router bit selected should have a depth of cut at least 3mm less than the thickness of the timber being routed. This will determine the bit angle. For rabbeted drawers, the bit selected should have a depth of cut less that the rebate.\n\u003cbr\u003eLeigh offers five half-blind bits to suit board thicknesses from 12.7mm to 22.2mm or greater.\n\u003cbr\u003eHalf-Blind Dovetail Bit Selection\n\u003cbr\u003eBit selection is based on the thickness material used. Ideally, select the cutter with the deepest depth of cut possible, that is less than the thickness of the material.\n\u003cbr\u003eEach blind dovetail bit has a different angle, yet the same diameter of 12.7mm (1\/2”), however each has a different depth of cut.\n\u003cbr\u003eThe below information advises the depth of cut for both single pass and variably spaced blind dovetails, and the depth of cut for the router bit. To get a tighter or looser fit, the router bit needs to be adjusted up or down, rather than the jig being adjusted.\u003c\/p\u003e\n\n\u003cp\u003eLGH-80-8 8° Variably Spaced Dovetails 19mm \/ Single Pass Blind Dovetails 10.7mm Diameter 1\/2” OD, Router bit depth of cut 19.05mm (3\/4”)\n\u003cbr\u003eLGH-101-8 10° Variably Spaced Dovetails 15.8mm \/ Single Pass Blind Dovetails 9.1mm Diameter 1\/2” OD, Router bit depth of cut 15.9mm (5\/8”)\n\u003cbr\u003eLGH-112-8 12° Variably Spaced Dovetails 12.7mm \/ Single Pass Blind Dovetails 7.5mm Diameter 1\/2” OD, Router bit depth of cut 12.7mm (1\/2”)\n\u003cbr\u003eLGH-120-8 14° Variably Spaced Dovetails 11.1mm \/ Single Pass Blind Dovetails 6.35mm Diameter 1\/2” OD, Router bit depth of cut 11.1mm (7\/16”)\n\u003cbr\u003eLGH-128-8 18° Variably Spaced Dovetails 9.5mm \/ Single Pass Blind Dovetails 4.75mm Diameter 1\/2” OD, Router bit depth of cut 9.5mm (3\/8”)\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815635829011,"sku":"LGH-128-8","price":33.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-128-8.jpg?v=1702619574"},{"product_id":"leigh-router-cutter","title":"Leigh Through Dovetail Bit - 5\/16\" Diameter - 8mm Shank","description":"\u003cp\u003eStraight Bit supplied with Jig; used for routing all pin for matching dovetails for 80-8 bits and smaller.\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815635861779,"sku":"LGH-140-8","price":33.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-140-8.jpg?v=1702619577"},{"product_id":"straight-bit","title":"Leigh Through Dovetail Bit - 7\/16\" Diameter 1\/2\" Shank","description":"\u003cp\u003eLeigh Through Dovetail Bit - 1\/2\" shank dia. 7\/16\" cutting dia.\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815635894547,"sku":"LGH-150","price":33.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-150.jpg?v=1702619577"},{"product_id":"leigh-router-bit","title":"Leigh Through Dovetail Bit - 1\/2\" dia.","description":"\u003cp\u003eLeigh Through Dovetail Bit - 1\/2\" dia.\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815635927315,"sku":"LGH-160","price":33.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-160.jpg?v=1702619578"},{"product_id":"r-h-finger-complete-with-wedge-nut-screw-d4-d4r-lgh-465","title":"Leigh R\/H D4R Pro Guide Finger Complete w\/Wedge Nut Screw","description":"\u003cp\u003eReplacement guide finger for your D4, D4R \u0026amp; D4R Pro Jigs. Finger comes with wedge, nut, washer, screw and stop rod hole. Finger may also work with D1258, D1258R and D3 jigs, however as these fingers were made in a different die-casting mould, the height of the finger may be slightly different when used in conjunction with your original fingers. It may be advisable to upgrade the complete set of fingers.\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815636582675,"sku":"LGH-465","price":19.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-475.jpg?v=1705993536"},{"product_id":"l-h-finger-complete-with-wedge-nut-screw-d4-d4r-lgh-475","title":"Leigh L\/H D4R Pro Guide Finger Complete w\/Wedge Nut Screw","description":"\u003cp\u003eReplacement guide finger for your D4, D4R \u0026amp; D4R Pro Jigs. Finger comes with wedge, nut, washer, screw and stop rod hole. Finger may also work with D1258, D1258R and D3 jigs, however as these fingers were made in a different diecasting mould, the height of the finger may be slightly different when used in conjunction with your original fingers. It may be advisable to upgrade the complete set of fingers.\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815636943123,"sku":"LGH-475","price":22.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-475_e1bab09d-6d27-4304-bb99-fbcafa5abd5c.jpg?v=1705993537"},{"product_id":"through-dovetail-bit-lgh-60-8","title":"Leigh Through Dovetail Bit 8° - 7.9mm Diameter","description":"\u003cp\u003eLeigh jigs come standard with a selection of router bits. These are designed for doing joints in commonly used timber, between 12mm and 20mm.\n\u003cbr\u003eTo do dovetails in material outside these thicknesses, an additional dovetail bit it needed, for materials up to 20mm. For materials from 20mm to 32mm, a combination of straight bit and dovetail bit are required.\n\u003cbr\u003eMost of these bits have 8mm shank, which provide far greater strength than 1\/4” shanked bits. There are exceptions to this, these are indicated, and require a large guide bush.\n\u003cbr\u003eLGH-60-8 can route dovetails into material up to 9.5mm, to be used with LGH-140-8, which is standard with the jig. This has an OD of 8mm (5\/16”).\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815637041427,"sku":"LGH-60-8","price":33.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-60-8.jpg?v=1702619602"},{"product_id":"leigh-louver-door-guides","title":"Leigh Louver Door Guides","description":"\u003cp\u003eUse the FMT to make precise louver doors with standard 1\/4\" x 1-1\/4\" louvers at a 45° angle. Use the 6701LGP to cut matching tenons that can be routed on the ends of louver stock or radiused louver stock can be routed to fit the mortice. The LGH-6701LGP are sold as a matching left and right pair.\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815637074195,"sku":"LGH-6701LGP","price":79.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-6701LGP.jpg?v=1702619605"},{"product_id":"leigh-square-tenon-guides","title":"Leigh Square Tenon Guides","description":"\u003cp\u003eThese Leigh 670900 Square tenon guides come in four sizes: 1\/4\", 5\/16\", 3\/8\" and 1\/2\". These guides can rout square cornered tenons to match any mortice length up to 5\". These also have the ability to rout lap joints and other types of joints, not just mortices and tenons.All square tenons are routed with a 1\/2\" router bit.\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815637139731,"sku":"LGH-670900","price":125.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-670900.jpg?v=1702619608"},{"product_id":"leigh-router-cutter-lgh-70-8","title":"Leigh Through Dovetail Bit - 8° Angle 12.7mm Cut Depth","description":"\u003cp\u003eLeigh jigs come standard with a selection of router bits. These are designed for doing joints in commonly used timber, between 12mm and 20mm.\n\u003cbr\u003eTo do dovetails in material outside these thicknesses, an additional dovetail bit it needed, for materials up to 20mm. For materials from 20mm to 32mm, a combination of straight bit and dovetail bit are required.\n\u003cbr\u003eMost of these bits have 8mm shank, which provide far greater strength than 1\/4\" shanked bits. There are exceptions to this, these are indicated, and require a large guide bush.\n\u003cbr\u003eLGH-70-8 can route dovetails into material from 6.35mm to 12.7mm, to be used with LGH-140-8, which is standard with the jig. This has an OD of 9.5mm (3\/8\").\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815637696787,"sku":"LGH-70-8","price":39.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-70-8.jpg?v=1702619619"},{"product_id":"leigh-fingers-for-d1600","title":"Leigh Replacement Superjig and D1600 Fingers","description":"\u003cp\u003eLeigh jigs give the ability to do multiple different types of dovetail joints, and finger joints. This is done by using the template in a specific orientation, which when flipped end for end, or back to front, aligns the matching pins to the dovetails.\n\u003cbr\u003ePurchase these as replacements for damaged fingers, when screws, wedges or nuts are lost, or simply add to the quantity of fingers to do wider half blind dovetails than the standard amount will allow.\n\u003cbr\u003eTip: When in use tighten the screw to it does not work lose with the vibration of the router, as finding the small parts is near on impossible.\n\u003cbr\u003eThese fingers are sold individually, and compete with the screw, wedges and nut required.\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815638155539,"sku":"LGH-7200","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-7200.jpg?v=1705993551"},{"product_id":"dovetail-bit-lgh-80-500","title":"Leigh Through Dovetail Bit - 8° - 1\/2\" Shank","description":"\u003cp\u003eReplacement router bit for the Leigh RTJ400 dovetail jig. Featuring a 1\/2\" shank, and used with an E10 guide bush rather than the E7 guide bush many of the other jigs use. The 1\/2\" shank allows the bit to be longer, making router table use possible.\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815638221075,"sku":"LGH-80-500","price":36.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-80-500.jpg?v=1702619629"},{"product_id":"dovetail-bit-lgh-80-8","title":"Leigh Through Dovetail Bit - 8°","description":"\u003cp\u003eLeigh jigs come standard with a selection of router bits. These are designed for doing joints in timber, between 12mm and 20mm.\n\u003cbr\u003eThis is the Through Dovetail Bit that comes with the jig.\n\u003cbr\u003eTo do dovetails in material outside these thicknesses, an additional dovetail bit it needed, for materials up to 20mm. For materials from 20mm to 32mm, a combination of straight bit and dovetail bit are required.\n\u003cbr\u003eMost of these bits have 8mm shank, which provide far greater strength than 1\/4\" shanked bits. There are exceptions to this, these are indicated, and require a large guide bush.\n\u003cbr\u003eLGH-80-8 can route dovetails into material from 12.7mm to 20.5mm, to be used with LGH-140-8, which is standard with the jig. This has an OD of 12.7mm (1\/2\").\n\u003cbr\u003eThis bit is also used for blind dovetails.\n\u003cbr\u003eHalf blind dovetails are generally done for drawers where mechanical function of the dovetails are hidden when the drawer is pushed closed. Like dovetails, drawers have been made have been made this way for centuries.\n\u003cbr\u003eOn a dovetail jig, the tails and pins are cut at the same time with the two pieces clamped into the jig at 90° to each other.\n\u003cbr\u003eThe router bit selected should have a depth of cut at least 3mm less than the thickness of the timber being routed. This will determine the bit angle. For rabbeted drawers, the bit selected should have a depth of cut less that the rebate.\n\u003cbr\u003eLeigh offers five half-blind bits to suit board thicknesses from 12.7mm to 22.2mm or greater.\n\u003cbr\u003eHalf-Blind Dovetail Bit Selection\n\u003cbr\u003eBit selection is based on the thickness material used. Ideally, select the cutter with the deepest depth of cut possible, that is less than the thickness of the material.\n\u003cbr\u003eEach blind dovetail bit has a different angle, yet the same diameter of 12.7mm (1\/2\"), however each has a different depth of cut.\n\u003cbr\u003eThe below information advises the depth of cut for both single pass and variably spaced blind dovetails, and the depth of cut for the router bit. To get a tighter or looser fit, the router bit needs to be adjusted up or down, rather than the jig being adjusted.\u003c\/p\u003e\n\n\u003cp\u003eLGH-80-8 8° Variably Spaced Dovetails 19mm \/ Single Pass Blind Dovetails 10.7mm Diameter 1\/2\" OD, Router bit depth of cut 19.05mm (3\/4\")\n\u003cbr\u003eLGH-101-8 10° Variably Spaced Dovetails 15.8mm \/ Single Pass Blind Dovetails 9.1mm Diameter 1\/2” OD, Router bit depth of cut 15.9mm (5\/8”)\n\u003cbr\u003eLGH-112-8 12° Variably Spaced Dovetails 12.7mm \/ Single Pass Blind Dovetails 7.5mm Diameter 1\/2” OD, Router bit depth of cut 12.7mm (1\/2”)\n\u003cbr\u003eLGH-120-8 14° Variably Spaced Dovetails 11.1mm \/ Single Pass Blind Dovetails 6.35mm Diameter 1\/2” OD, Router bit depth of cut 11.1mm (7\/16”)\n\u003cbr\u003eLGH-128-8 18° Variably Spaced Dovetails 9.5mm \/ Single Pass Blind Dovetails 4.75mm Diameter 1\/2” OD, Router bit depth of cut 9.5mm (3\/8”)\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815638253843,"sku":"LGH-80-8","price":35.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-80-8.jpg?v=1702619631"},{"product_id":"dovetail-bit-lgh-90","title":"Leigh Through Dovetail Bit - 8° - 1\/2\" Shank","description":"\u003cp\u003eLeigh jigs come standard with a selection of router bits. These are designed for doing joints in commonly used timber, between 12mm and 20mm.\n\u003cbr\u003eTo do dovetails in material outside these thicknesses, an additional dovetail bit it needed, for materials up to 20mm. For materials from 20mm to 32mm, a combination of straight bit and dovetail bit are required.\n\u003cbr\u003eMost of these bits have 8mm shank, which provide far greater strength than 1\/4” shanked bits. There are exceptions to this, these are indicated, and require a large guide bush.\n\u003cbr\u003eLGH-90 can route dovetails into material from 15.8mm to 25.4mm, to be used with LGH-160, this is also an optional extra bit. This has an OD of 17.5mm (11\/16”).\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815638286611,"sku":"LGH-90","price":39.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-90.jpg?v=1702619630"},{"product_id":"accessory-kit-for-d4r","title":"Leigh D4R VRS Accessory Kit - VRS + 2411-8 Bit Set","description":"\u003cp\u003eA Must-Have for Your JigThe process if routing dovetails on a Leigh jig creates a lot of fine saw dust, and quite quickly. The Vacuum and Router Support(VRS) helps to collect this as it is created. In addition to this, the Support part of the VRS gives the router support before, during and after the cutting process. On top of the VRS are the adjustable control arms, the router sits between these arms moving the dust chute with the router. This means the duct chute is always where the cutting is being done, providing the most effective dust extraction possible. The VRS has an adaptor to accept hose sizes of either 1” of 2-1\/2”, common to most vacuum systems. This accessory kit combines the VRS and a set of router bits at a great KIT price. LGH-VRSD24 and LGH-24118 bit set make up the LGH-ACD24 for the Leigh D4R\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815638352147,"sku":"LGH-ACD24","price":519.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-ACD24.jpg?v=1702619636"},{"product_id":"accessory-kit-for-super-12","title":"Leigh Super 12 VRS Accessory Kit - VRS + 1607-8 Bit Set","description":"\u003cp\u003eA Must-Have for Your Jig The process if routing dovetails on a Leigh jig creates a lot of fine saw dust, and quite quickly. The Vacuum and Router Support(VRS) helps to collect this as it is created. In addition to this, the Support part of the VRS gives the router support before, during and after the cutting process. On top of the VRS are the adjustable control arms, the router sits between these arms moving the dust chute with the router. This means the duct chute is always where the cutting is being done, providing the most effective dust extraction possible. The VRS has an adaptor to accept hose sizes of either 1” of 2-1\/2”, common to most vacuum systems. This accessory kit combines the VRS and a set of router bits at a great KIT price. LGH-VRS12 and LGH-16078 bit set make up the LGH-AC12 for the Leigh Super 12 jig\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815638384915,"sku":"LGH-AC12","price":369.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-AC12.jpg?v=1702619635"},{"product_id":"accessory-kit-to-suit-leigh-rtj400","title":"Leigh Accessory Kit to suit RTJ400 Router Table Dovetail Jig","description":"\u003cp\u003eMake your RTJ400 more versatile, these extra bits allow you to rout more sizes of through dovetails, half-blind dovetails and box joints, in material of varying thicknesses.\n\u003cbr\u003eIncludes: \u003c\/p\u003e\n\n\u003cp\u003e8° Through Dovetail Bits 50-8(1\/4\"), 60-8(5\/16\"), 70-8(3\/8\") and 75-8(7\/16\"),\n\u003cbr\u003eStraight bit 140-8,\n\u003cbr\u003eHalf-blind bits 112-500(12°) and 128-500(18°),\n\u003cbr\u003eBox joint bits 163(3\/32\") and 166(3\/16\"),\n\u003cbr\u003e1 x e-Bush (e7)\n\u003cbr\u003e1 x collet reducer 172-8 (1\/2\" to 8mm).\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815638417683,"sku":"LGH-ACRTJ","price":299.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-ACRTJ.jpg?v=1702619637"},{"product_id":"leigh-b975","title":"Leigh Box Joint \u0026 Beehive Jig","description":"\u003cp\u003eThis jig was developed after many requests from beekeepers for a way to manufacture bee hives using finger joints, so the B975 Box Joint \u0026amp; Beehive Jig was born.\n\u003cbr\u003eThe B975 is a multipurpose box joint jig,  and is one of the easiest and simplest jigs to both setup and use. Used to make box and finger joints in 1\/2\" and 3\/4\" sizes in material up to 20mm thick, and anywhere from as little as 2\" wide to a massive 452mm, it can be used with the workpiece clamped in a vice and the router handheld, or for those with a router table compatible with a guide bush system it can be used inverted on the table.\n\u003cbr\u003eLeigh ingenuity has flowed on from their many other products directly into this box joint jig, it has been designed to be simple and easy to use, with a minimum of setup.\n\u003cbr\u003eBeing a simple finger joint, joint size is just a matter of adjusting the included eBush to the right position, mark the manual for future reference and with the included 1\/2\" Straight Router bit, you’re away. The other consideration is the width of the timber, outside the recommended width, and the user is left with a narrow socket and\/or pin, project planning is suggested.\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815638581523,"sku":"LGH-B975","price":159.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-B975.jpg?v=1705993563"},{"product_id":"d4r-pro-24-dovetailjig-metr-1-c-12kg-92-22-21-cm","title":"Leigh D4R Pro Dovetail Jig with Metric Scales","description":"\u003cp\u003eMaster precise joinery with the Leigh D4R Pro Dovetail Jig with Metric Scales, designed to deliver professional, hand-cut-quality results. This versatile jig makes mastering intricate joinery accessible to woodworkers of all levels. Unlike fixed-comb jigs that limit creativity, the D4R Pro features adjustable fingers for custom spacing and a hand-made look. Whether you're crafting heirloom furniture or custom cabinetry, this jig offers the precision and consistency your projects deserve. The included metric scales ensure accurate measurements for Australian woodworkers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Dovetail Spacing:\u003c\/strong\u003e Adjustable fingers allow for unique, hand-crafted dovetails, avoiding the rigid spacing of traditional jigs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Material Compatibility: \u003c\/strong\u003eHandle timber from 12mm to 20mm with standard bits, or expand to 3mm–31mm with optional accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional Joint Options: \u003c\/strong\u003eCreate through dovetails, half-blind dovetails, sliding dovetails, finger joints, and end-to-end joints with one system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSave Time Without Compromising Quality:\u003c\/strong\u003e Complete complex joinery quickly while maintaining precision and beauty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent, Repeatable Results: \u003c\/strong\u003eAchieve flawless joints every time with precision-engineered components and comprehensive guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe D4R Pro is ideal for furniture making, cabinetry, and fine woodworking projects where strong, beautiful joints are essential. Create drawers with half-blind dovetails, shelves with sliding dovetails, or decorative finger joints for boxes. Perfect for workshops requiring both precision and efficiency, this jig makes complex joinery a skill accessible to all, elevating every project.\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815638614291,"sku":"LGH-D4R","price":1099.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-D4R.jpg?v=1776304028"},{"product_id":"leigh-fmt-jig-imperial","title":"Leigh Pro Mortise \u0026 Tenon Jig","description":"\u003cp\u003eAchieve flawless mortise and tenon joinery with the Leigh Pro Mortise \u0026amp; Tenon Jig. This precision-engineered tool allows you to rout both the mortise and tenon using the same jig, guaranteeing a perfect fit for your projects every time. You can create single, double, twin, triple, and even quadruple mortise and tenons, offering unmatched versatility. The jig enables repeatable, production-style routing, making it ideal for both one-off pieces and larger batches. Craft with confidence and bring a new level of professionalism to your furniture making and cabinetry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePerfectly Matched Joints: Rout both the mortise and tenon with one setup for a flawless fit.\u003c\/li\u003e\n\u003cli\u003eIncredible Versatility: Create single, double, twin, triple, and quadruple joints.\u003c\/li\u003e\n\u003cli\u003eProduction Ready: Allows for repeatable routing for efficient, consistent results.\u003c\/li\u003e\n\u003cli\u003eComplex Joinery: Capable of producing angled and miniature joints with ease.\u003c\/li\u003e\n\u003cli\u003eStandard \u0026amp; Optional Sizes: Comes with 5\/16\" (7.9mm) guides and bit, with three other sizes available separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis jig is designed for woodworkers who demand precision and strength in their joinery. It's the ideal solution for creating robust and beautiful joints for furniture, cabinets, and any project requiring exceptional craftsmanship. Whether you are a dedicated hobbyist or a professional, this tool will elevate the quality and efficiency of your work.\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815639040275,"sku":"LGH-FMT","price":2226.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-FMTPRO-UPDATED.jpg?v=1760738836"},{"product_id":"router-table-dovetail-jig","title":"Leigh RTJ400 Router Table Dovetail Jig","description":"\u003cp\u003eRouter tables are exceedingly popular and can be found in most shops. The Leigh RTJ400 is designed specifically for router table use, providing fast and accurate routing of through dovetails, box joints and half-blind dovetails, all on your router table. The Leigh RTJ400 Template is precision CNC machined from aircraft grade aluminium for perfect joinery every time.Versatility is a key feature of the Leigh 16\"(400mm) RTJ400 Jig. It makes 5 sizes of through dovetails at two different pitches, 3 sizes of single pass half-blind dovetails, and 4 sizes of box joints (finger joints). Perfect joint fit is guaranteed and repeatable with the patented Leigh elliptical guide bushing.The Leigh RTJ400 is capable of: Full pitch through Dovetails; Half pitch through Dovetails; Half Blind Dovetails; Box\/Finger joints; Angled Dovetails; End on End Dovetails.The Leigh RTJ400 Dovetail Jig makes precise joinery easy. Simply center the board on the template and guide the jig across the router table to rout the joints. Note: this is not suitable for use with any model Triton table.\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815639269651,"sku":"LGH-RTJ400","price":599.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-RTJ400_2.jpg?v=1702619669"},{"product_id":"leigh-super-jig-12-metric","title":"Leigh Super Jig 12\" (305mm) with Metric Scales","description":"\u003cp\u003e• Infinitely adjustable guide fingers\n\u003cbr\u003e• Variably spaced through dovetails up to 13\/16\"\n\u003cbr\u003e• Variably spaced half-blind dovetails up to 1\"\n\u003cbr\u003e• Sliding dovetails\n\u003cbr\u003e• \"Single Pass\" half-blind dovetails\n\u003cbr\u003e• 5\/16\" and 5\/8\" box joints\n\u003cbr\u003e• Non-slip clamping surface\n\u003cbr\u003e• Cam action clamps\n\u003cbr\u003e• Under cut side stops\n\u003cbr\u003e• Easy to read scales\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815639433491,"sku":"LGH-SJ12M","price":599.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-SJ12M.jpg?v=1702619668"},{"product_id":"leigh-through-dovetail-jig-td330","title":"Leigh TD330 Through Dovetail Jig","description":"\u003cdiv data-stretch-type=\"full\"\u003eRout classic through dovetails at a price that fits any budget! The new TD330 from Leigh is made for all woodworkers - from beginners to professionals. Take your next woodworking project to the next level.\u003cdiv data-stretch-type=\"full\"\u003eCan be used with hand-held router, or on your router table!Make joints in boards from 32mm (1-1\/4\") up to 327mm (12-7\/8\") wideBoards up to 20.6mm (13\/16\") in thicknessSold as a complete kit including -30% Glass filled Nylon Through Dovetail Template1\/2\" Shank Straight and Dovetail Router BitsE-Bush Guide with \"Tuning Fork\"Adjustable Side StopsComprehensive instruction manualCheck the description for more information!NB - the MDF spoilboard shown in some images is not included\u003c\/div\u003e\n\u003c\/div\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815639466259,"sku":"LGH-TD330","price":179.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-TD330.jpg?v=1705993592"},{"product_id":"leigh-super-jig-18-metric-1-c-8kg-80-21-21-cm","title":"Leigh Super Jig 18\" (457mm) with Metric Scales","description":"\u003cp\u003e• Infinitely adjustable guide fingers\n\u003cbr\u003e• Variably spaced through dovetails up to 13\/16\"\n\u003cbr\u003e• Variably spaced half-blind dovetails up to 1\"\n\u003cbr\u003e• Sliding dovetails\n\u003cbr\u003e• \"Single Pass\" half-blind dovetails\n\u003cbr\u003e• 5\/16\" and 5\/8\" box joints\n\u003cbr\u003e• Non-slip clamping surface\n\u003cbr\u003e• Cam action clamps\n\u003cbr\u003e• Under cut side stops\n\u003cbr\u003e• Easy to read scales\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815639499027,"sku":"LGH-SJ18M","price":724.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-SJ18M.jpg?v=1702619672"},{"product_id":"leigh-vrs-suits-super-12","title":"Leigh VRS System - suits LGH-SJ12","description":"\u003cp\u003eA Must-Have for Your Jig\n\u003cbr\u003eThe process if routing dovetails on a Leigh jig creates a lot of fine saw dust, and quite quickly. The Vacuum and Router Support(VRS) helps to collect this as it is created. In addition to this, the Support part of the VRS gives the router support before, during and after the cutting process.\n\u003cbr\u003eOn top of the VRS are the adjustable control arms, the router sits between these arms moving the dust chute with the router. This means the duct chute is always where the cutting is being done, providing the most effective dust extraction possible.\n\u003cbr\u003eThe VRS has an adaptor to accept hose sizes of either 1” of 2-1\/2”, common to most vacuum systems.\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815639531795,"sku":"LGH-VRS12","price":169.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-VRS12.jpg?v=1702619673"},{"product_id":"leigh-vrs-suits-super-18","title":"Leigh VRS System - suits LGH-SJ18","description":"\u003cp\u003eA Must-Have for Your Jig\n\u003cbr\u003eThe process if routing dovetails on a Leigh jig creates a lot of fine saw dust, and quite quickly. The Vacuum and Router Support(VRS) helps to collect this as it is created. In addition to this, the Support part of the VRS gives the router support before, during and after the cutting process.\n\u003cbr\u003eOn top of the VRS are the adjustable control arms, the router sits between these arms moving the dust chute with the router. This means the duct chute is always where the cutting is being done, providing the most effective dust extraction possible.\n\u003cbr\u003eThe VRS has an adaptor to accept hose sizes of either 1” of 2-1\/2”, common to most vacuum systems.\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815639564563,"sku":"LGH-VRS18","price":185.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-VRS18.jpg?v=1702619677"},{"product_id":"leigh-vrs-suits-d4r","title":"Leigh VRS System - suits LGH-D4R","description":"\u003cp\u003eA Must-Have for Your JigThe process if routing dovetails on a Leigh jig creates a lot of fine saw dust, and quite quickly. The Vacuum and Router Support(VRS) helps to collect this as it is created. In addition to this, the Support part of the VRS gives the router support before, during and after the cutting process. On top of the VRS are the adjustable control arms, the router sits between these arms moving the dust chute with the router. This means the duct chute is always where the cutting is being done, providing the most effective dust extraction possible. The VRS has an adaptor to accept hose sizes of either 1” of 2-1\/2”, common to most vacuum systems.\u003c\/p\u003e","brand":"LEIGH","offers":[{"title":"Default Title","offer_id":47815639597331,"sku":"LGH-VRSD24","price":199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/LGH-VRSD24.jpg?v=1702619678"}],"url":"https:\/\/mycarbateflash.com\/collections\/leigh-dovetail-jigs-and-accessories.oembed","provider":"Carbatec","version":"1.0","type":"link"}