{"title":"Chuck Jaws","description":"","products":[{"product_id":"teknatool-mini-cole-jaw-set","title":"Nova 8\" Mini Cole Jaw Set","description":"\u003cp\u003eA versatile Mini 8\" Cole Jaw set designed for re-chucking of bowls to remove chuck marks or to reshape the bottoms of bowls that have already been turned.Other Nova jaw sets can be fitted to Mini Cole Jaws to make a combination assembly - examples include expanded dovetail assemblies for bowls and platters and reverse dovetail assemblies for mounting footed bowls and platters. Offers many advantages over vacuum chucking.Mini Cole Jaws are suitable for lathes with a minimum swing of 10\" (250mm). Weight: 640g.Larger Cole Jaw Sets are available including the TK-JSCOLE 10\" set, suitable for lathes with a minimum 12\" Diameter swing and TK-6040 12\" Large Cole Jaws, suited to lathes with a minimum 14\" diameter swing.\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815735804179,"sku":"TK-6006","price":86.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-6006.jpg?v=1702621761"},{"product_id":"teknatool-75mm-bowl-jaws","title":"Nova Bowl Jaws - 75mm","description":"\u003cp\u003eSpecial NOVA dovetail profile, designed to maximum strength and holding in wood turning, without crushing wood fibres. Perfect for bowl and spigot projects. Designed for expanded dovetail and reverse dovetail holds, for gripping footed bowls.EXPANDING GRIP81mm (3.18\") – 102mm (4.01\")CONTRACTING GRIPSquare: 34mm (1.33\") – 55mm (2.16\")Spigot: 46.5mm (1.83\") – 67mm (2.65\")Actual sizes may vary depending on which NOVA chuck is being used.This jaw set is very versatile; has great holding power for large bowls and also moderate hollow forms. Features standard on all NOVA Jaws: Full Cross Function - Only NOVA Chucks give you the same jaw fixing system and same insert\/adaptor system across all chuck models. This means all accessory jaws in the range fit all the chucks in the range; including older chuck models; giving you the ultimate flexibility. In buying a NOVA chuck; you can be confident that whether you want to move up or down the range; any accessories you have invested in will Fit. Special Dovetail Profile - NOVA chucks have been especially designed so the jaws will cut into the wood; grip firmly in the contraction mode and provide high tear out strength. Some chucks use an engineering jaw profile (designed to hold a hard material like steel) or rounded profiles; which just crush the wood fibres without digging in and holding securely.\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815735836947,"sku":"TK-6014","price":99.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-6014.jpg?v=1702621760"},{"product_id":"teknatool-75mm-long-nose-jaws","title":"Nova Long Nose Jaws - 75mm","description":"\u003cp\u003eThe NOVA 6017 75mm (3\") Long Nosed Chuck Accessory Jaw Set features a 2\" rise above their base which means a very long reach, deep inside bowls. This is a very versatile jaw with tremendous holding power externally and internally. An ideal set for green wood turning. The internal features dovetail grip for holding footed bowls and other footed work pieces.EXPANDING GRIP53.9mm (2.12\") – 73mm (2.87\")CONTRACTING GRIPSquare: 49.8mm (1.96\") – 29mm (1.14\")Spigot: 59.9mm (2.36\") – 39.9mm (1.57\")Actual sizes may vary depending on which NOVA chuck is being used.This unique long nosed jaws set has a 50mm 2inch rise above their mounting base means very long reach deep inside of bowls. Features standard on all NOVA Jaws: Full Cross Function: Only NOVA Chucks give you the same jaw fixing system and same insert\/adaptor system across all chuck models. This means all accessory jaws in the range fit all the chucks in the range; including older chuck models; giving you the ultimate flexibility. In buying a NOVA chuck; you can be confident that whether you want to move up or down the range; any accessories you have invested in will Fit. Special Dovetail Profile: NOVA chucks have been especially designed so the jaws will cut into the wood; grip firmly in the contraction mode and provide high tear out strength. Some chucks use an engineering jaw profile (designed to hold a hard material like steel) or rounded profiles; which just crush the wood fibres without digging in and holding securely.\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815735869715,"sku":"TK-6017","price":99.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-6017.jpg?v=1702621763"},{"product_id":"teknatool-35mm-bowl-jaw-set","title":"Nova Bowl Jaw Set - 35mm","description":"\u003cp\u003eDesigned to expand your range and capacity of your standard NOVA Chuck for specific projects and applications. Universally fits to any NOVA Chuck for maximum flexibility, saving money as duplicate accessories are not needed for different NOVA Chucks. The NOVA 6019 35mm (1.37\") Bowl Chuck Accessory Jaw Set Jaw is perfect for smaller bowl work. With a special NOVA Wood Turning Dovetail Profile, designed specifically for maximum strength and holding in wood turning, without crushing the wood fibres. These jaws will hold in both the contraction and the expansion modes.EXPANDING GRIP37.9mm (1.49\") – 59mm (2.32\")CONTRACTING GRIPSquare: 29mm (1.14\") – 7.9mm (0.31\")Spigot: 31mm (1.22\") – 9.9mm (0.39\")Actual sizes may vary depending on which NOVA chuck is being used.\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815735902483,"sku":"TK-6019","price":54.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-6019.jpg?v=1702621765"},{"product_id":"teknatool-soft-jaws","title":"Nova Soft Jaws","description":"\u003cp\u003eThe Teknatool Soft Jaws allow the user to shape their own jaws out of this softer; more malleable material. This is great for smaller projects where the standard metal jaws may create indentations and marr the surface of the turning.\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815736099091,"sku":"TK-6021","price":34.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-6021.jpg?v=1702621767"},{"product_id":"nova-mini-spigot-jaw","title":"Nova Mini Spigot Jaw Set","description":"\u003cp\u003eNOVA 6026 Mini Spigot Accessory Jaw Set is an accessory for NOVA chucks, designed to expand your range and capacity of your standard NOVA chuck for specific projects and applications. Universally fits to any NOVA chuck for maximum flexibility, saving money as duplicate accessories are not needed for different NOVA chucks.This jaw set has a long nose to allow for a very powerful spigot grip for smaller work such as lace bobbins. Features a wood turning Dovetail Profile, designed specifically for maximum strength and holding in woodturning, without crushing the wood fibres. These jaws will hold in both the contraction and the expansion modes.EXPANDING GRIP24.9mm (0.98\") – 45mm (1.77\")CONTRACTING GRIPSquare: 31mm (1.22\") – 9.9mm (0.39\")Spigot: 30mm (1.18\") – 7.9mm (0.31\")Actual sizes may vary depending on which NOVA chuck is being used.NOVA Mini jaws set is designed to enrich NOVA jaw offering in mini turning area. They are ideal to use on NOVA Midi chuck for midi\/mini work. Benefits and Features: A great range of smaller projects can be mounted and turned using either the expansion mode (mostly for bowls) or the contraction mode (mostly for spigots); Made from medium tensile carbon K1045 steel to provide maximum structural strength; Standard Woodworm Screw can be used with these jaws; Able to be used on all Teknatool Chucks in the range.\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815736262931,"sku":"TK-6026","price":79.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-6026.jpg?v=1702621770"},{"product_id":"mini-jaw-set-pack-of-4","title":"Nova 4 Piece Jaw Set","description":"\u003cp\u003eThis is the set to have, giving 4 sets of jaws in the one box. The Nova 4 Piece Jaw Set adds even greater versatility to your NOVA G3 and Super Nova2 chucks, filling in the gaps left between 50 mm and 70 mm jaws.\n\u003cbr\u003eMini jaw set includes one of each of the following:\u003c\/p\u003e\n\n\u003cp\u003e20mm Mini Jaws\n\u003cbr\u003e70 mm Jaws\n\u003cbr\u003eMini Spigot Jaws\n\u003cbr\u003eMini Step Jaws\u003c\/p\u003e\n\n\u003cp\u003eMachined from a single solid piece of 1045 high tensile steel, you are guaranteed to receive precise closing, durability, and a long life from each of jaw sets.\u003c\/p\u003e\n\n\u003cp\u003eUniversal Mini Spigot Chuck Jaw Set has a long nose to allow for very powerful spigot grip for smaller work such as lace bobbins.\n\u003cbr\u003eUniversal Mini Three Step Chuck Jaw Set has three steps providing optimum gripping of three base sizes with minimal crush damage to the wood, and has an internal spigot grip to hold small unsupported or supported spindle work.\n\u003cbr\u003eA 70mm Universal Chuck Jaw Set is perfect for bowls and spigot projects with expanded and reverse dovetail design.\n\u003cbr\u003eThe 20mm Universal Mini Chuck Jaw Set is ideal to use on midi and mini lathes to hold and turn small bowls and unsupported small spigot pieces.\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815736295699,"sku":"TK-6027","price":249.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-6027.jpg?v=1702621772"},{"product_id":"nova-pen-jaws","title":"Nova Pen Plus Jaw Set","description":"\u003cp\u003eNOVA Pen 'Plus' Jaws easily convert your NOVA chuck into a fast and accurate pen blank drilling facility. The big jaw profile provides a vibration free, solid grip for all sizes of pen blanks and an accurate centered hole every time. Being able to finely control the drill feed on the lathe is a big advantage to prevent break out on those delicate pen walls. Also perfect for squaring up the pen blank ends after gluing in the pen kit tubes.CONTRACTING GRIPSquare:From 10mm (0.3937\") up to over 25.4mm (1\")Length of turnings from jaws up to 228.6mm (9\")Rounds:From under 11.58mm (0.4561\") up to over 19.05mm (0.75\")Length of turnings from jaws up to 254mm (10\")\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815736328467,"sku":"TK-6034","price":74.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-6034.jpg?v=1702621774"},{"product_id":"cole-jaw-buffer-kit","title":"Nova Cole Jaw Buffer Kit","description":"\u003cp\u003eThe Cole Jaw Buffer Kit is designed to work with the Nova Cole Jaws \u0026amp; Mini Cole jaws. The purpose of the kit is to provide the user wtih increased versatility and safety when rechucking bowls for final finishing etc. Comes with 16 buffers and required fixings for Nova Cole and Mini Cole Jaws.\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815736361235,"sku":"TK-6030","price":54.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-6030.jpg?v=1702621774"},{"product_id":"nova-cole-jaw-set-large-12","title":"Nova 12\" Large Cole Jaw Set","description":"\u003cp\u003eThe NOVA Large Cole Jaw Set is 12\"\/305mm in diameter. The NOVA 6040 Large Cole Jaw Set has been designed for the re-chucking of bowls to remove chuck marks, add decoration or to re-shape the bottoms of bowls that have already been turned. NOVA Large Cole Jaws are suitable for lathes with a minimum 14inch\/350mm swing diameter and can be customised with false wooden jaws. See TK-JSCOLE for a smaller 10\" Cole Jaw option, suited to lathes with a 12\" minimum swing, or the TK-6006 Mini 8\" Cole Jaw set, for lathes with a minimum 10\" swing.Includes:\u003c\/p\u003e\n\n\u003cp\u003e4 jaw segments\n\u003cbr\u003eSpecial fasteners\n\u003cbr\u003eStandard rubber bumpers and instructions.\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815736394003,"sku":"TK-6040","price":159.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-6040.jpg?v=1705995753"},{"product_id":"teknatool-100mm-jaw-set","title":"Nova 100mm Jaw Set","description":"\u003cp\u003eDesigned to expand your range and capacity of your standard NOVA chuck for specific projects and applications. The NOVA JS100N is one of NOVA's most popular chuck accessories to mount 12-14\" bowls.Mount customized false wooden jaws and the customized jaws can be made for special purposes. They are built with a turning dovetail profile to maximize strength without jeopardizing wood fibres, and can hold both in contraction and expansion modes.EXPANDING GRIP96.8mm (3.81\") – 118mm (4.64\")CONTRACTING GRIPSquare: 77mm (3.03\") – 56mm (2.2\")Spigot: 99mm (3.89\") – 76mm (2.99\")Actual sizes may vary depending on which NOVA chuck is being used.The 100mm jaw sets are designed for an expanded dovetail grip (up to 14inch dia); reverse dovetail grip for gripping footed bowls; limited spigot facility (up to 6inch long) and provision to mount false wooden jaws; so customised jaws can be made for special purposes. They are made for a larger range of work than the standard 50mm jaws or Step Jaws. One of our most popular jaws to mount 12inch-14inch bowls. Can mount false wooden jaws; so customised jaws can be made for special purposes. (Require Fastenings) Features standard on all NOVA Jaws: Full Cross Function - Only NOVA Chucks give you the same jaw fixing system and same insert\/adaptor system across all chuck models. This means all accessory jaws in the range fit all the chucks in the range; including older chuck models*; giving you the ultimate flexibility. In buying a NOVA chuck; you can be confident that whether you want to move up or down the range; any accessories you have invested in will Fit.\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815737344275,"sku":"TK-JS100N","price":89.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-JS100N.jpg?v=1705995769"},{"product_id":"teknatool-130mm-jumbo-jaw-set","title":"Nova 130mm Jumbo Jaw Set","description":"\u003cp\u003eNOVA JS130N 130mm (5\") Chuck Accessory Jaw Set is an accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA Chuck for specific projects and applications. Universally fits to any NOVA Chuck* for maximum flexibility, saving money as duplicate accessories are not needed for different NOVA Chucks.The NOVA JS130N 130mm (5\") Chuck Accessory Jaw Set is designed to mount big bowls, up to 29\" in diameter. They are designed particularly for the expanded dovetail, reverse dovetail for gripping footed bowls. With a special NOVA wood turning dovetail profile, designed specifically for maximum strength and holding in wood turning, without crushing the wood fibres. These jaws will hold in both the contraction and the expansion modes. Precisely machined from a single solid piece of 1045 high tensile steel for precise closing, durability and long life.EXPANDING GRIP47mm (1.85\") – 127mm (5\")CONTRACTING GRIPSquare: 96.8mm (3.81\") – 77mm (3.03\")Spigot: 107mm (4.21\") – 28mm (1.1\")Actual sizes may vary depending on which NOVA chuck is being used.The big brother to the 100mm jaw set; for large work. Can mount false wooden jaws; so customised jaws can be made for special purposes. Features standard on all NOVA Jaws: Full Cross Function: Only NOVA Chucks give you the same jaw fixing system and same insert\/adaptor system across all chuck models. This means all accessory jaws in the range fit all the chucks in the range; including older chuck models*; giving you the ultimate flexibility. In buying a NOVA chuck; you can be confident that whether you want to move up or down the range; any accessories you have invested in will Fit. Special Dovetail Profile: NOVA chucks have been especially designed so the jaws will cut into the wood; grip firmly in the contraction mode and provide high tear out strength. Some chucks use an engineering jaw profile (designed to hold a hard material like steel) or rounded profiles; which just crush the wood fibres without digging in and holding securely.\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815737377043,"sku":"TK-JS130N","price":89.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-JS130N.jpg?v=1705995773"},{"product_id":"nova-20mm-jaw","title":"Nova 20mm Jaw","description":"\u003cp\u003eThe NOVA JS20N (20mm\/0.78\") Mini Accessory Chuck Jaw set is for small bowls and unsupported small spigot turning. Ideal for midi\/mini lathe work.EXPANDING GRIP19.8mm (0.78\") – 41.4mm (1.63\")CONTRACTING GRIPSquare: 19.8mm (0.78\") – 9.9mm (0.39\")Spigot: 30mm (1.18\") – 7.9mm (0.31\")Actual sizes may vary depending on which NOVA chuck is being used.NOVA Mini jaws set is designed to enrich NOVA jaw offering in mini turning area. They are ideal to use on NOVA Midi chuck for midi\/mini work. Benefits and Features: A great range of smaller projects can be mounted and turned using either the expansion mode (mostly for bowls) or the contraction mode (mostly for spigots); Made from medium tensile carbon K1045 steel to provide maximum structural strength; Standard Woodworm Screw can be used with these jaws; Able to be used on all Teknatool Chucks in the range.\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815737540883,"sku":"TK-JS20N","price":69.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-JS20N.jpg?v=1702621798"},{"product_id":"teknatool-25mm-jaw-set","title":"Nova 25mm Jaw Set","description":"\u003cp\u003e• A quick and easy workholding solution for small bowls and small unsupported spigot work.\n\u003cbr\u003e• Turn smaller projects using either the expansion mode (i.e. bowls) or the contraction mode (i.e. spigots)\n\u003cbr\u003e• Multiple turned pieces (i.e. lace bobbins) can be turned from dowel stock\n\u003cbr\u003e• Made from K1045 steel for maximum structural strength.\n\u003cbr\u003e• The standard Woodworm Screw (included with NOVA chucks) can be used with these jaws.\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815737737491,"sku":"TK-JS25N","price":74.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-JS25N.jpg?v=1702621799"},{"product_id":"nova-70mm-jaw","title":"Nova 70mm Bowl Jaw","description":"\u003cp\u003eOnly NOVA chucks give you optimal flexibility with the same jaw fixing system and same insert\/adapter system across all standard chuck models. All of the accessory jaws in the standard chuck range will fit all of the standard NOVA chucks(G3 and SN2).EXPANDING GRIP69.9mm (2.75\") – 89.9mm (3.54\")CONTRACTING GRIPSquare: 65mm (2.56\") – 36.8mm (1.45\")Spigot: 77mm (3.03\") – 56mm (2.20\")Actual sizes may vary depending on which NOVA chuck is being used.The Nova is a universal and versatile jaw set, fitting both the Nova G3 and SN2 chucks. They are made from medium tensile carbon K1045 steel to provide maximum structural strength, with expanded and reverse dovetails to hold turned spigots in the base of vessels and bowls.\u003c\/p\u003e\n\n\u003cp\u003eExpanding action gripping inside a round recess - 70 to 90mm diameter\n\u003cbr\u003eContracting action on square stock - 37 to 65mm square\n\u003cbr\u003eContracting action on a round spigot (foot) - 56 to 77mm diameter\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815737835795,"sku":"TK-JS70N","price":79.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-JS70N.jpg?v=1702621802"},{"product_id":"teknatool-75mm-step-jaws","title":"Nova 75mm Step Jaws","description":"\u003cp\u003eThe NOVA JS75DT Step Chuck Accessory Jaw Set has three step sizes providing optimum gripping of 3 base (foot) sizes with minimal crush damage to wood. The optimum step sizes are 1.65\", 2\", 2.5\".EXPANDING GRIP77.5mm (3.05\") – 97.3mm (3.83\")CONTRACTING GRIPSquare:51mm (2.0\") – 30mm (1.18\")56.9mm (2.24\") – 35.8mm (1.41\")65.8mm (2.59\") – 45mm (1.77\")Spigot:62.5mm (2.46\") – 41.4mm (1.63\")71.4mm (2.81\") – 50.3mm (1.98\")83.3mm (3.28\") – 63.5mm (2.50\")Actual sizes may vary depending on which NOVA chuck is being used.These step jaws are designed primarily to grip in the contracting mode; the base (foot) of footed bowls. The step sizes provide optimum gripping for three foot sizes with minimal crush damaged wood. There is also an expanding dovetail made for alternative recess gripping of bowls. Can hold bowls up to 12inch in diameter. Optimum Step sizes: *42mm (1.65inch) * 50mm (2inch) * 64mm (2.5inch) Features standard on all NOVA Jaws: Full Cross Function: Only NOVA Chucks give you the same jaw fixing system and same insert\/adaptor system across all chuck models. This means all accessory jaws in the range fit all the chucks in the range; including older chuck models*; giving you the ultimate flexibility. In buying a NOVA chuck; you can be confident that whether you want to move up or down the range; any accessories you have invested in will Fit. Special Dovetail Profile: NOVA chucks have been especially designed so the jaws will cut into the wood; grip firmly in the contraction mode and provide high tear out strength.\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815737868563,"sku":"TK-JS75DT","price":99.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-JS75DT.jpg?v=1705995778"},{"product_id":"teknatool-pin-jaw-set","title":"Nova Pin Jaw Set","description":"\u003cp\u003eThe NOVA JSPIN Pin Accessory Jaw set has a long nose, designed to act as a pin chuck – expanding into a pre-bored hole, a very useful technique for free-form edged bowls. It is not necessary to bore an exact size as with other pin jaws. The longer jaws allow for a very powerful spigot grip for smaller work such as lace bobbins. They are also ideal for longer dowel work. Twist drills can be gripped to enable the chuck to be used as a drill chuck. The jaw-set features a small dovetail to mount small bowls.EXPANDING GRIP25.9mm (1.02\") – 46mm (1.81\")CONTRACTING GRIPSquare: 28mm (1.10\") – 7mm (0.27\")Spigot: 31mm (1.22\") – 9.9mm (0.39\")Actual sizes may vary depending on which NOVA chuck is being used.These special 25mm extended jaws are designed to act like a pin chuck - expanding into a pre-bored hole. This is an especially useful technique for free form edge bowls. A real big advantage over Pin Chucks though is that you don't have to bore to an exact size - any size between the minimum and just under the maximum expansion will do. The longer jaws allow for a very powerful spigot grip for all smaller work like lace bobbins (up to 6inch in length) and delicate pots etc. The jaws also have a dovetail to mount small bowls (up to 6inch dia). Features standard on all NOVA Jaws: Full Cross Function: Only NOVA Chucks give you the same jaw fixing system and same insert\/adaptor system across all chuck models. This means all accessory jaws in the range fit all the chucks in the range; including older chuck models*; giving you the ultimate flexibility. In buying a NOVA chuck; you can be confident that whether you want to move up or down the range; any accessories you have invested in will Fit.\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815737901331,"sku":"TK-JSPIN","price":94.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-JSPIN.jpg?v=1702621805"},{"product_id":"teknatool-cole-jaw-set","title":"Nova 10\" Cole Jaw Set","description":"\u003cp\u003eThis standard 10\" Nova Cole Jaw Set is designed for use with Nova chucks.A versatile set designed for re-chucking of bowls to remove chuck marks; add decoration or to re-shape the bottoms of bowls that have already been turned.Other Nova jaw sets can be fitted to the Cole Jaws making a combination jaw facility - expanding dovetail facility for mounting bowls\/platters and a reverse dovetail for mounting footed bowls\/platters, they provide many advantages over traditional vacuum chucking.Standard Cole Jaws are suitable for lathes with minimum 12inch\/300mm swing diameter and can be customised with false wooden jaws. A larger 12\" Cole Jaw Set TK-6040 is available for lathes with a minimum 14\" diameter swing, or conversely a Mini 8\" Cole Jaw Set TK-6006 is available for lathes with a minimum 10\" diameter swing.Includes:4 x Aluminum Cole Jaw Segments8 x rubber buffers8 x Nova screw c\/sunk M6x208 x screw c\/sunk M6x16\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815737934099,"sku":"TK-JSCOLE","price":119.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-JSCOLE.jpg?v=1705995779"},{"product_id":"teknatool-powergrip-jaws","title":"Nova Powergrip Jaws","description":"\u003cp\u003eNova Powergrip Jaws!The most powerful jaw available in the Nova range. A great multi-purpose jaw suited to large spigot\/bowl\/hollow form turning on the larger Nova chucks; SuperNova 2 or Titan. Precision milled from a single piece of 1045 high tensile steel, for accuracy.Expanding grip of 95mm (3.74\") to 116mm (4.56\").Contracting grip on square 76mm (2.99\") to 55mm (2.16\")Contracting Grip on Spigot 97.8mm (3.85\") to 77mm (3.03\")Note that actual sizes may vary depending on which chuck is in use.\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815738065171,"sku":"TK-PJSN","price":119.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-PJSN.jpg?v=1702621806"},{"product_id":"teknatool-spigot-jaws-35mm","title":"Nova Spigot Jaws - 35mm","description":"\u003cp\u003eFor work where a long overhang is needed or hollowing into end grain, these 35mm Spigot Jaws provide superior gripping power.EXPANDING GRIP51.8mm (2.04\") – 71.9mm (2.83\")CONTRACTING GRIPSquare: 44.96mm (1.77\") – 24.9mm (0.98\")Spigot: 49.8mm (1.96\") – 40.9mm (1.61\")Actual sizes may vary depending on which NOVA chuck is being used.Specially designed to provide a strong grip both in the contracting (gripping round or square spigots) and in the expanding mode with up to 10inch long work piece. Features standard on all NOVA Jaws: Full Cross Function: Only NOVA Chucks give you the same jaw fixing system and same insert\/adaptor system across all chuck models. This means all accessory jaws in the range fit all the chucks in the range; including older chuck models*; giving you the ultimate flexibility. In buying a NOVA chuck; you can be confident that whether you want to move up or down the range; any accessories you have invested in will Fit. Special Dovetail Profile: NOVA chucks have been especially designed so the jaws will cut into the wood; grip firmly in the contraction mode and provide high tear out strength. Some chucks use an engineering jaw profile (designed to hold a hard material like steel) or rounded profiles; which just crush the wood fibres without digging in and holding securely.\u003c\/p\u003e","brand":"NOVA","offers":[{"title":"Default Title","offer_id":47815738458387,"sku":"TK-SP35","price":89.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-SP35.jpg?v=1702621812"},{"product_id":"nova-112mm-greenwood-jaw-set","title":"Nova 112mm Greenwood Jaw Set","description":"","brand":"NOVA","offers":[{"title":"Default Title","offer_id":52381150052627,"sku":"TK-6089","price":119.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-6089-1.jpg?v=1758774121"},{"product_id":"nova-50mm-greenwood-jaw-set","title":"Nova 50mm Greenwood Jaw Set","description":"","brand":"NOVA","offers":[{"title":"Default Title","offer_id":52381150085395,"sku":"TK-6088","price":74.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-6088-1.jpg?v=1758772839"},{"product_id":"nova-1-hornung-jaw-set","title":"Nova 1\" Hornung Jaw Set","description":"","brand":"NOVA","offers":[{"title":"Default Title","offer_id":52381150118163,"sku":"TK-6090","price":52.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-6090-1-1100x1100.jpg?v=1758774268"},{"product_id":"nova-dome-jaw-set","title":"Nova Dome Jaw Set","description":"","brand":"NOVA","offers":[{"title":"Default Title","offer_id":52381150150931,"sku":"TK-6091","price":74.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-6091-5-1100x1100.jpg?v=1758772611"},{"product_id":"nova-30mm-bowl-jaw-set","title":"Nova 30mm Bowl Jaw Set","description":"","brand":"NOVA","offers":[{"title":"Default Title","offer_id":52381150183699,"sku":"TK-6100","price":52.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/TK-6100-1-1100x1100.jpg?v=1758774090"},{"product_id":"carbatec-scroll-chuck-pen-jaw-set","title":"Carbatec Scroll Chuck Pen Jaw Set","description":"\u003ch3 data-start=\"87\" data-end=\"149\"\u003eCarbatec Pen Jaws – Precision Drilling for Pen Blanks\u003c\/h3\u003e\n\u003cp data-start=\"151\" data-end=\"602\"\u003ePrecision CNC machined, the Carbatec Pen Jaws are designed for mounting on Carbatec Chucks to meet the specific demands of accurately drilling pen blanks. The heavy, long profile provides a stable and secure clamping mount, ensuring vibration-free performance when used with a Morse taper drill chuck and drill bit in the tailstock (sold separately). This precision is critical for achieving the fine tolerances required in high-quality pen turning.\u003c\/p\u003e\n\u003ch3 data-start=\"604\" data-end=\"637\"\u003eKey Features \u0026amp; Capacity\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"640\" data-end=\"711\"\u003e\n\u003cstrong data-start=\"640\" data-end=\"662\"\u003eClamping Capacity:\u003c\/strong\u003e 10–25.4 mm square stock, 11–19 mm round stock.\u003c\/li\u003e\n\u003cli data-start=\"714\" data-end=\"786\"\u003eProvides a stable, vibration-free hold for precise, accurate drilling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"788\" data-end=\"818\"\u003eWhy Choose Pen Jaws?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"821\" data-end=\"868\"\u003eDesigned specifically for pen blank drilling.\u003c\/li\u003e\n\u003cli data-start=\"871\" data-end=\"930\"\u003eHeavy, long profile ensures secure mounting and accuracy.\u003c\/li\u003e\n\u003cli data-start=\"933\" data-end=\"997\"\u003eCNC precision machining delivers consistent, reliable results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"999\" data-end=\"1122\"\u003e\u003cstrong data-start=\"999\" data-end=\"1013\"\u003eImportant:\u003c\/strong\u003e Capacities are intended as a guideline only. Always follow proper training and safe woodturning practices.\u003c\/p\u003e","brand":"CARBATEC","offers":[{"title":"Default Title","offer_id":52697387991315,"sku":"SC-J-PEN","price":45.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/SC-J-PEN-03-MOUNTED.jpg?v=1781586570"},{"product_id":"carbatec-scroll-chuck-100mm-dovetail-jaw-set","title":"Carbatec Scroll Chuck 100mm Dovetail Jaw Set","description":"\u003ch3 data-end=\"194\" data-start=\"99\"\u003eCarbatec 100 mm Dovetail Profile Jaws – Precision for Medium to Large Turning Projects\u003c\/h3\u003e\n\u003cp data-end=\"484\" data-start=\"196\"\u003ePrecision CNC machined, the Carbatec 100 mm Dovetail Jaws are designed to fit perfectly on Carbatec Scroll Chucks. Expanding on the standard 50 mm set, these jaws provide a secure and versatile solution for medium to larger turning projects, with safe operation at speeds up to 680 RPM.\u003c\/p\u003e\n\u003ch3 data-end=\"519\" data-start=\"486\"\u003eKey Features \u0026amp; Capacity\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-end=\"712\" data-start=\"522\"\u003e\n\u003cstrong data-end=\"544\" data-start=\"522\"\u003eInternal Clamping:\u003c\/strong\u003e 56–77 mm square stock, 78–99 mm round stock. Optimal foot diameter is 85 mm, with up to 12 mm depth for maximum jaw contact. Supports bowls up to 310 mm in diameter.\u003c\/li\u003e\n\u003cli data-end=\"895\" data-start=\"715\"\u003e\n\u003cstrong data-end=\"739\" data-start=\"715\"\u003eExpanding Grip Hold:\u003c\/strong\u003e 97–118 mm; ideal recess diameter 97 mm with full 9 mm depth. In this configuration, bowls up to 360 mm diameter and 125 mm depth\/thickness can be turned.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"939\" data-start=\"897\"\u003eWhy Choose 100 mm Dovetail Jaws?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-end=\"1007\" data-start=\"942\"\u003ePrecision CNC machining ensures secure and consistent clamping.\u003c\/li\u003e\n\u003cli data-end=\"1071\" data-start=\"1010\"\u003eExpands your chuck’s capacity for medium to large projects.\u003c\/li\u003e\n\u003cli data-end=\"1153\" data-start=\"1074\"\u003eVersatile internal and expanding hold options for a wide range of bowl sizes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1278\" data-start=\"1155\"\u003e\u003cstrong data-end=\"1169\" data-start=\"1155\"\u003eImportant:\u003c\/strong\u003e Capacities are intended as a guideline only. Always follow proper training and safe woodturning practices.\u003c\/p\u003e","brand":"CARBATEC","offers":[{"title":"Default Title","offer_id":52697388024083,"sku":"SC-J-100","price":49.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/SC-J-100-03-MOUNTED.jpg?v=1781585555"},{"product_id":"carbatec-scroll-chuck-pin-jaw-set","title":"Carbatec Scroll Chuck Pin Jaw Set","description":"\u003cp data-end=\"157\" data-start=\"87\"\u003e\u003cstrong data-end=\"155\" data-start=\"90\"\u003eCarbatec Pin Jaws – Precision Hold for Small Turning Projects\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"445\" data-start=\"159\"\u003ePrecision CNC machined for Carbatec Chucks, the Carbatec Pin Jaws are ideal for small turning projects such as finials, pepper mills, and other detailed work. Their small but long profile allows full insertion into a matching recess, providing an exceptionally strong and secure hold.\u003c\/p\u003e\n\u003cp data-end=\"480\" data-start=\"447\"\u003e\u003cstrong data-end=\"478\" data-start=\"451\"\u003eKey Features \u0026amp; Capacity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"676\" data-start=\"483\"\u003e\n\u003cstrong data-end=\"505\" data-start=\"483\"\u003eInternal Clamping:\u003c\/strong\u003e 7–28 mm square stock, 10–31 mm round stock. Use the maximum spigot length of 32 mm for the strongest grip. Supports stock up to 150 mm × 25 mm at speeds up to 1400 RPM.\u003c\/li\u003e\n\u003cli data-end=\"855\" data-start=\"679\"\u003e\n\u003cstrong data-end=\"702\" data-start=\"679\"\u003eExpanding Capacity:\u003c\/strong\u003e 25–46 mm; full insertion into a 26 mm diameter recess provides maximum jaw contact. Suitable for bowls up to 300 mm diameter × 75 mm depth at 680 RPM.\u003c\/li\u003e\n\u003cli data-end=\"992\" data-start=\"858\"\u003e\n\u003cstrong data-end=\"876\" data-start=\"858\"\u003eDovetail Hold:\u003c\/strong\u003e Using just the dovetail profile in a matching recess (26 mm × 4 mm) allows bowls up to 150 mm × 50 mm at 680 RPM.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1024\" data-start=\"994\"\u003e\u003cstrong data-end=\"1022\" data-start=\"998\"\u003eWhy Choose Pin Jaws?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1074\" data-start=\"1027\"\u003ePerfect for small, detailed turning projects.\u003c\/li\u003e\n\u003cli data-end=\"1140\" data-start=\"1077\"\u003eLong, slender profile ensures deep insertion and strong hold.\u003c\/li\u003e\n\u003cli data-end=\"1235\" data-start=\"1143\"\u003eExpanding and dovetail options provide versatile mounting for a range of small workpieces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1347\" data-start=\"1237\"\u003e\u003cstrong data-end=\"1251\" data-start=\"1237\"\u003eImportant:\u003c\/strong\u003e Capacities are guidelines only. Always follow formal training and safe woodturning practices.\u003c\/p\u003e","brand":"CARBATEC","offers":[{"title":"Default Title","offer_id":52697388056851,"sku":"SC-J-PIN","price":49.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/SC-J-PIN-TOP.jpg?v=1764126984"},{"product_id":"carbatec-scroll-chuck-long-nose-jaw-set","title":"Carbatec Scroll Chuck Long Nose Jaw Set","description":"\u003ch3 data-end=\"175\" data-start=\"104\"\u003eCarbatec Long Nose Jaws – Extended Reach for Precision Turning\u003c\/h3\u003e\n\u003cp data-end=\"435\" data-start=\"177\"\u003ePrecision CNC machined, the Carbatec Long Nose Jaws are specially designed for mounting on Carbatec Chucks. Featuring an extra-long 50 mm “nose,” these jaws provide exceptional reach, making them ideal for intricate or hard-to-access areas of your project.\u003c\/p\u003e\n\u003ch3 data-end=\"470\" data-start=\"437\"\u003eKey Features \u0026amp; Capacity\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-end=\"546\" data-start=\"473\"\u003e\n\u003cstrong data-end=\"491\" data-start=\"473\"\u003eMaximum Speed:\u003c\/strong\u003e 750 RPM in expanding hold, 600 RPM in clamping hold.\u003c\/li\u003e\n\u003cli data-end=\"692\" data-start=\"549\"\u003e\n\u003cstrong data-end=\"571\" data-start=\"549\"\u003eClamping Capacity:\u003c\/strong\u003e Serrated jaws ensure a secure grip on square stock 29–50 mm and round stock 40–60 mm (recommended for end-grain only).\u003c\/li\u003e\n\u003cli data-end=\"843\" data-start=\"695\"\u003e\n\u003cstrong data-end=\"714\" data-start=\"695\"\u003eExpanding Hold:\u003c\/strong\u003e Outer dovetail profile allows 54–73 mm, ideal for bowls up to 200 mm diameter and 100 mm depth; optimal recess diameter 56 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"881\" data-start=\"845\"\u003eWhy Choose Long Nose Jaws?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-end=\"940\" data-start=\"884\"\u003eExtra-long nose provides superior reach into projects.\u003c\/li\u003e\n\u003cli data-end=\"1001\" data-start=\"943\"\u003ePrecision CNC machining for consistent, secure clamping.\u003c\/li\u003e\n\u003cli data-end=\"1090\" data-start=\"1004\"\u003eExpanding and clamping capacities offer versatility across a range of project sizes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1221\" data-start=\"1092\"\u003e\u003cstrong data-end=\"1106\" data-start=\"1092\"\u003eImportant:\u003c\/strong\u003e These capacities are intended as a guideline only. Always follow formal training and safe woodturning practices.\u003c\/p\u003e","brand":"CARBATEC","offers":[{"title":"Default Title","offer_id":52697388089619,"sku":"SC-J-LN","price":57.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/SC-J-LN-03-MOUNTED.jpg?v=1781586248"},{"product_id":"carbatec-scroll-chuck-130mm-dovetail-jaw-set","title":"Carbatec Scroll Chuck 130mm Dovetail Jaw Set","description":"\u003ch3 data-start=\"110\" data-end=\"185\"\u003eCarbatec 130 mm Dovetail Profile Jaws – For Large Turning Projects\u003c\/h3\u003e\n\u003cp data-start=\"187\" data-end=\"451\"\u003ePrecision CNC machined, the Carbatec 130 mm Dovetail Jaws are engineered to fit perfectly on Carbatec Scroll Chucks. As the largest jaw set in our range, they provide secure mounting for your biggest turning projects, with safe operation at speeds up to 400 RPM.\u003c\/p\u003e\n\u003ch3 data-start=\"453\" data-end=\"486\"\u003eKey Features \u0026amp; Capacity\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"489\" data-end=\"674\"\u003e\n\u003cstrong data-start=\"489\" data-end=\"511\"\u003eInternal Clamping:\u003c\/strong\u003e 77–97 mm square stock, 107–128 mm round stock; optimal foot diameter 109 mm, up to 12 mm depth for maximum jaw contact. Supports bowls up to 750 mm in diameter.\u003c\/li\u003e\n\u003cli data-start=\"677\" data-end=\"846\"\u003e\n\u003cstrong data-start=\"677\" data-end=\"701\"\u003eExpanding Grip Hold:\u003c\/strong\u003e 127–147 mm; best recess diameter 128 mm with full 9 mm depth. In this configuration, bowls up to 750 mm diameter and 75 mm deep can be turned.\u003c\/li\u003e\n\u003cli data-start=\"849\" data-end=\"928\"\u003e\n\u003cstrong data-start=\"849\" data-end=\"876\"\u003eSteeper Dovetail Pitch:\u003c\/strong\u003e Ensures a secure, stable hold on larger projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"930\" data-end=\"972\"\u003eWhy Choose 130 mm Dovetail Jaws?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"975\" data-end=\"1040\"\u003ePrecision CNC machining guarantees consistent, secure clamping.\u003c\/li\u003e\n\u003cli data-start=\"1043\" data-end=\"1105\"\u003eLarge capacity handles even your biggest bowls and projects.\u003c\/li\u003e\n\u003cli data-start=\"1108\" data-end=\"1183\"\u003eExpanding grip design provides versatility for a wide range of diameters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1185\" data-end=\"1328\"\u003e\u003cstrong data-start=\"1185\" data-end=\"1199\"\u003eImportant:\u003c\/strong\u003e These measurements are intended as a guideline only. Proper training and safe woodturning practices should always be followed.\u003c\/p\u003e","brand":"CARBATEC","offers":[{"title":"Default Title","offer_id":52697388122387,"sku":"SC-J-130","price":49.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/SC-J-130-03-MOUNTED.jpg?v=1781586047"},{"product_id":"carbatec-scroll-chuck-75mm-step-jaw-set","title":"Carbatec Scroll Chuck 75mm Step Jaw Set","description":"\u003ch3 data-end=\"175\" data-start=\"102\"\u003eCarbatec Step Jaws – Maximum Versatility for Your Lathe Projects\u003c\/h3\u003e\n\u003cp data-end=\"569\" data-start=\"177\"\u003eThe Carbatec Step Jaws deliver unmatched versatility from a single precision-machined set. Designed with a stepped-dovetail profile, these jaws expand your internal footed bowl clamping options, allowing you to handle a wide range of project sizes safely and accurately. Used at speeds up to 680 RPM, they are ideal for both hobbyists and professionals who demand precision and reliability.\u003c\/p\u003e\n\u003ch3 data-end=\"604\" data-start=\"571\"\u003eKey Features \u0026amp; Capacity\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-end=\"696\" data-start=\"607\"\u003e\n\u003cstrong data-end=\"625\" data-start=\"607\"\u003eSmallest Step:\u003c\/strong\u003e 30–51 mm square stock, 41.5–62.5 mm round stock; optimal 42 mm foot.\u003c\/li\u003e\n\u003cli data-end=\"786\" data-start=\"699\"\u003e\n\u003cstrong data-end=\"715\" data-start=\"699\"\u003eMiddle Step:\u003c\/strong\u003e 36–57 mm square stock, 50.5–71.5 mm round stock; optimal 51 mm foot.\u003c\/li\u003e\n\u003cli data-end=\"877\" data-start=\"789\"\u003e\n\u003cstrong data-end=\"806\" data-start=\"789\"\u003eLargest Step:\u003c\/strong\u003e 45–66 mm square stock, 63.5–83.5 mm round stock; optimal 64 mm foot.\u003c\/li\u003e\n\u003cli data-end=\"1043\" data-start=\"880\"\u003e\n\u003cstrong data-end=\"903\" data-start=\"880\"\u003eExpanding Capacity:\u003c\/strong\u003e Outer-most profile allows 77.5–97.5 mm; 79 mm recess provides maximum jaw contact. Supports bowls up to 360 mm diameter and 100 mm depth.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"1076\" data-start=\"1045\"\u003eWhy Choose Step Jaws?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-end=\"1132\" data-start=\"1079\"\u003ePrecision-machined for consistent, secure clamping.\u003c\/li\u003e\n\u003cli data-end=\"1204\" data-start=\"1135\"\u003eStepped design maximizes versatility across multiple project sizes.\u003c\/li\u003e\n\u003cli data-end=\"1273\" data-start=\"1207\"\u003eIdeal for internal footed bowls of various diameters and depths.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1416\" data-start=\"1275\"\u003e\u003cstrong data-end=\"1289\" data-start=\"1275\"\u003eImportant:\u003c\/strong\u003e The capacities listed are intended as a guideline. Proper training and safe woodturning practices should always be followed.\u003c\/p\u003e","brand":"CARBATEC","offers":[{"title":"Default Title","offer_id":52697388155155,"sku":"SC-J-75S","price":49.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/SC-J-75S-03-MOUNTED.jpg?v=1781585313"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/collections\/TK-JS100N.jpg?v=1753337407","url":"https:\/\/mycarbateflash.com\/collections\/chuck-jaws.oembed","provider":"Carbatec","version":"1.0","type":"link"}