{"title":"Box Making Tools","description":"","products":[{"product_id":"chair-doctor-glue-57ml-2oz-veritas","title":"Veritas Chair Doctor Glue 2 Oz","description":"\u003cp\u003eChair Doctor™ glue does exactly what the name implies, it fixes chairs. If a chair has a loose joints, simply squeeze some Chair Doctor glue in. The glue will first swell the rung of the chair and then bond it in position.\n\u003cbr\u003eThe secret is its low viscosity. It soaks into the end grain of wood, swelling the wood and then freeze the wood in the swollen state as it cures. A film of dry glue lines the wood cells, preventing contraction, with the glue able to penetrate the narrowest of cracks. Any excess or spillage can be removed with a damp cloth, and any missed on a surface will dry clear.\n\u003cbr\u003eChair Doctor comes in a 2 fl oz bottle with a slim applicator tip that lets you place the glue accurately. Usually, you let Chair Doctor glue seep into a loose joint, but for many loose joints you can actually slip our finest needle alongside the tenon to the base of the socket, then inject it full of glue. For very difficult repairs, you can drill a tiny hole (from below or behind) and inject glue into a joint that way. With a syringe, it is very easy to do a large number of joints quickly and neatly. Even better, everything cleans with just water so the needles and syringe are reusable indefinitely.\n\u003cbr\u003eFor fixing loose joints (where you cannot or do not want to take everything apart), Chair Doctor glue is ideal.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815171440915,"sku":"05K99-01","price":27.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05K99-01.jpg?v=1702615672"},{"product_id":"chair-doctor-glue-114ml-4oz-veritas","title":"Veritas Chair Doctor Glue 4 Oz","description":"\u003cp\u003eChair Doctor™ glue does exactly what the name implies, it fixes chairs. If a chair has a loose joints, simply squeeze some Chair Doctor glue in. The glue will first swell the rung of the chair and then bond it in position.\n\u003cbr\u003eThe secret is its low viscosity. It soaks into the end grain of wood, swelling the wood and then freeze the wood in the swollen state as it cures. A film of dry glue lines the wood cells, preventing contraction, with the glue able to penetrate the narrowest of cracks. Any excess or spillage can be removed with a damp cloth, and any missed on a surface will dry clear.\n\u003cbr\u003eChair Doctor Pro includes 4 fl oz of glue, 1 syringe, and 3 sizes of blunt-tip needles. Usually, you let Chair Doctor glue seep into a loose joint, but for many loose joints you can actually slip our finest needle alongside the tenon to the base of the socket, then inject it full of glue. For very difficult repairs, you can drill a tiny hole (from below or behind) and inject glue into a joint that way. With a syringe, it is very easy to do a large number of joints quickly and neatly. Even better, everything cleans with just water so the needles and syringe are reusable indefinitely.\n\u003cbr\u003eFor fixing loose joints (where you cannot or do not want to take everything apart), Chair Doctor glue is ideal.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815171473683,"sku":"05K99-04","price":36.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05K99-04.jpg?v=1702615672"},{"product_id":"2pce-dovetail-marker-1-8-1-6-veritas-05n10-11","title":"Veritas 1:6 \u0026 1:8 Dovetail Markers (Set of Two)","description":"\u003cp\u003eFor quick, accurate marking of dovetails, a dovetail marker is the best tool available.\n\u003cbr\u003eWith riding ledges on both sides, these 2\" × 2\" markers can be flipped over to mark both slopes of the dovetail. They are designed so that the entire ledge is riding on the reference face, even when marking edge dovetails. The relieved corners at the join of the body and the riding ledges ensure perfect seating even on saw whiskers. Made from anodized aluminum, these markers are light, durable and never soil your work.\n\u003cbr\u003eAvailable as a set in the traditional ratios of 1:6 for softwood and 1:8 for hardwood. The 14° marker is designed to approximate a 1:4 ratio, for those who prefer this angle when working in thinner stock, as it not only provides stronger material interlock than traditional ratio angles but produces a slightly exaggerated dovetail joint that many find attractive.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815172587795,"sku":"05N10-11","price":33.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N10-11.jpg?v=1702615691"},{"product_id":"14deg-dovetail-marker-veritas-05n10-13","title":"Veritas 14° Dovetail Marker","description":"\u003cp\u003eFor quick and accurate marking of dovetails, a guide is the best way to go. The Veritas Dovetail Markers are designed to be large enough to cater for most sized dovetails, and able to flipped over to allow both slopes of the dovetail to be marked. Their design allows the front face of the dovetail to be referenced from the top mark, eliminating any guess work. Made from aluminium, they are light and will not damage the timber. The 14° angle is traditionally used in blind dovetails, when making drawers, so the joints are hidden from the front.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815172817171,"sku":"05N10-13","price":18.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N10-13.jpg?v=1702615693"},{"product_id":"saddle-square-marking-gauge-veritas","title":"Veritas Saddle Square Marking Gauge","description":"\u003cp\u003eTransferring a line from one surface to another perpendicular surface with a small square is never easy. Our saddle square solves this problem by allowing you to scribe two perpendicular surfaces at a time. It also lets you pick up on a line already scribed and accurately transfer it to another face perpendicular to it.\n\u003cbr\u003eTry continuing this line around all 4 faces and you'll see how far off you can be. This saddle square solves the problem by allowing you to scribe two perpendicular surfaces at a time. More importantly; it allows you to pick up on a line already scribed, and accurately transfer it to another face perpendicular to it. With 1-1\/4inch and 2-1\/4inch inside legs; it can be used to wrap a line around workpieces up to almost double this. Made of anodized aluminum; 2inch wide; with both end faces machined square to within 0.25 of a degree.\n\u003cbr\u003ePatented. Made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174160659,"sku":"05N56-01","price":34.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N56-01-veritas-saddle-square.jpg?v=1705988616"},{"product_id":"mitre-saddle-marking-gauge-veritas","title":"Veritas Mitre Saddle","description":"\u003cp\u003eWhen working on small items such as picture frames, a large combination square or try square can often be cumbersome. Not so with our miter saddle. The relatively small size makes it easy to use.\n\u003cbr\u003eDespite its size, it still has a large reference face (3 1\/2\" at the wide end) set at 45°. The leg measures 1\" wide by 2 1\/4\" long. As with our saddle squares, the sides are machined so that a line can be easily and accurately transferred around workpiece corners. With the miter saddle, however, a right-angle line on one surface is transferred as a 45° angle on the adjoining surface, or vice versa. This way, a line for a miter cut can be wrapped around all surfaces precisely and will meet perfectly at the corners. The inside corner is relieved to ensure perfect registration, even on saw whiskers.\n\u003cbr\u003eMade from anodized aluminum, this marker is light and durable, and will never mark your work.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174193427,"sku":"05N56-15","price":39.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N56-15-veritas-miter-saddle.jpg?v=1705988616"},{"product_id":"dovetail-saddle-1-6-guide-veritas","title":"Veritas 1:6 Dovetail Saddle Square","description":"\u003cp\u003eFor quick, accurate marking of dovetails, a dovetail marker is the best tool available.\n\u003cbr\u003eOur dovetail saddle markers are precision machined at 1:6 and 1:8 angles, the traditional angles for softwood and hardwood dovetails respectively. The new 14° marker is designed to approximate a 1:4 ratio, for those who prefer this angle when working in thinner stock, as it not only provides stronger material interlock than traditional ratio angles but produces a slightly exaggerated dovetail joint that many find attractive.\n\u003cbr\u003eThe long legs ensure accurate registration. Also, much like the Veritas saddle square they are based on, they allow a continuous line to be transferred around the corner, so the straight and angled lines can be scribed at the same time, ensuring perfect alignment. The inside corner is relieved to ensure flush seating even on saw whiskers.\n\u003cbr\u003eMade from anodized aluminum, these markers are light and durable, and will never mark your work.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174357267,"sku":"05N61-04","price":33.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N61-04-1-6-dovetail-saddle-marker.jpg?v=1705988621"},{"product_id":"dovetail-square-1-8-guide-veritas","title":"Veritas 1:8 Dovetail Saddle Square","description":"\u003cp\u003eFor quick, accurate marking of dovetails, a dovetail marker is the best tool available.\n\u003cbr\u003eOur dovetail saddle markers are precision machined at 1:6 and 1:8 angles, the traditional angles for softwood and hardwood dovetails respectively. The new 14° marker is designed to approximate a 1:4 ratio, for those who prefer this angle when working in thinner stock, as it not only provides stronger material interlock than traditional ratio angles but produces a slightly exaggerated dovetail joint that many find attractive.\n\u003cbr\u003eThe long legs ensure accurate registration. Also, much like the Veritas saddle square they are based on, they allow a continuous line to be transferred around the corner, so the straight and angled lines can be scribed at the same time, ensuring perfect alignment. The inside corner is relieved to ensure flush seating even on saw whiskers.\n\u003cbr\u003eMade from anodized aluminum, these markers are light and durable, and will never mark your work.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174324499,"sku":"05N61-05","price":33.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N61-05-1-8-dovetail-saddle-marker.jpg?v=1705988623"},{"product_id":"14deg-dovetail-saddle-marker-veritas","title":"Veritas 14° Dovetail Saddle Marker","description":"\u003cp\u003eFor quick, accurate marking of dovetails, a dovetail marker is the best tool available.\n\u003cbr\u003eOur dovetail saddle markers are precision machined at 1:6 and 1:8 angles, the traditional angles for softwood and hardwood dovetails respectively. The new 14° marker is designed to approximate a 1:4 ratio, for those who prefer this angle when working in thinner stock, as it not only provides stronger material interlock than traditional ratio angles but produces a slightly exaggerated dovetail joint that many find attractive.\n\u003cbr\u003eThe long legs ensure accurate registration. Also, much like the Veritas saddle square they are based on, they allow a continuous line to be transferred around the corner, so the straight and angled lines can be scribed at the same time, ensuring perfect alignment. The inside corner is relieved to ensure flush seating even on saw whiskers.\n\u003cbr\u003eMade from anodized aluminum, these markers are light and durable, and will never mark your work.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815174521107,"sku":"05N61-08","price":33.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05N61-08-14-dovetail-saddle-marker.jpg?v=1705988623"},{"product_id":"dovetail-saw-for-magnet-guide-veritas","title":"Veritas Dovetail Saw","description":"\u003cp\u003eThis saw was designed specifically for use with our saw guides. With a 2\" × 8 1\/2\", 22 tpi blade, the dozuki tooth form is effective in both crosscuts and rip cuts. Patented.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815191036179,"sku":"05T02-03","price":68.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05T02-03-veritas-dovetail-saw.jpg?v=1705989083"},{"product_id":"14deg-magnet-dovetail-guide-veritas","title":"Veritas 14° Dovetail Guide","description":"\u003cp\u003eEasily cut dovetails.Rare earth magnet holds the saw during cutting.Guides clamp securely.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815191101715,"sku":"05T02-05","price":118.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05T02-05-veritas-14-dovetail-guide.jpg?v=1705989084"},{"product_id":"dovetail-1-6-magnet-guide-veritas-05t02-11","title":"Veritas 1:6 Dovetail cutting Guide","description":"\u003cp\u003e• Easily cut dovetails.\n\u003cbr\u003e• Rare earth magnet holds the saw during cutting.\n\u003cbr\u003e• Guides clamp securely.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815191068947,"sku":"05T02-11","price":118.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05T02-11-veritas-1-6-dovetail-guide.jpg?v=1705989085"},{"product_id":"dovetail-1-8-magnet-guide-veritas-05t02-12","title":"Veritas 1:8 Dovetail cutting Guide","description":"\u003cp\u003e• Easily cut dovetails.\n\u003cbr\u003e• Rare earth magnet holds the saw during cutting.\n\u003cbr\u003e• Guides clamp securely.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815191134483,"sku":"05T02-12","price":118.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05T02-12-veritas-1-8-dovetail-guide.jpg?v=1705989087"},{"product_id":"dovetail-saw-14-tpi-standard-veritas","title":"Veritas Standard Dovetail Saw - 14TPi","description":"\u003cp\u003eVeritas dovetail saws are an innovative blend of tradition and technology, incorporating the critical characteristics of a classic fine joinery saw but made using modern production processes and state-of-the-art materials.\n\u003cbr\u003eThe spine is molded from an advanced material incorporating stainless-steel powder for weight, glass fiber for stiffness, and a polymer resin binder. An over-molded blade and stainless-steel handle-mounting bolt creates a solid blade\/spine\/mount assembly. A single brass fastener secures the hardwood handle.\n\u003cbr\u003eMade of high-carbon steel, the blade is 9 1\/4\" long and 0.020\" thick, with a cut depth of about 1 9\/16\". The teeth, set 0.003\" per side, have a rake angle of 14° and an included angle of 60°. The blades have 14 or 20 rip-cut teeth per inch. The 14 tpi model is most efficient on stock thicker than 1\/2\"; the less aggressive cut of the 20 tpi version is best for stock under 1\/2\" thick.\n\u003cbr\u003eComfortable and well balanced, each saw is 14 1\/4\" long overall.\n\u003cbr\u003ePatented. Made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815191331091,"sku":"05T05-01","price":187.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05T05-01.jpg?v=1705989093"},{"product_id":"small-crosscut-saw-16tpi-veritas","title":"Veritas Small Crosscut Saw - 16tpi","description":"\u003cp\u003eVeritas dovetail and crosscut saws are an innovative blend of tradition and technology. They incorporate all of the critical characteristics of a classic fine joinery saw; yet are executed using modern production processes and state-of-the-art materials. The blade and stainless-steel handle mounting bolt on each is completely over-moulded; creating a solid one-piece blade\/spine\/mount assembly. A single brass fastener secures the bubinga handle.* 14-1\/4\" (360mm) long overall; blade is 9-1\/4\" long (235mm) and 0.020\" thick with a cut depth of 1-9\/16\" (40mm)* 16 tpi crosscut saw is filed with alternating bevels, 0.003\" of set per side with 15° rake and bevel angles; used for cutting across or perpendicular to grain.* Spine is molded using an advanced material, with stainless-steel powder for weight, glass fiber for stiffness and polymer resin binder ** Over-molded high-carbon steel blade and stainless-steel handle-mounting bolt create solid one-piece blade\/spine\/mount assembly* Single brass fastener secures hardwood handle* A Canadian product* Patented\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815191396627,"sku":"05T06-01","price":182.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05T06-01.jpg?v=1705989093"},{"product_id":"dovetail-saw-20tpi-fine-cut-veritas","title":"Veritas Finecut Dovetail Saw - 20TPi","description":"\u003cp\u003eOur dovetail saws are an innovative blend of tradition and technology, incorporating the critical characteristics of a classic fine joinery saw but made using modern production processes and state-of-the-art materials.\n\u003cbr\u003eThe spine is molded from an advanced material incorporating stainless-steel powder for weight, glass fiber for stiffness, and a polymer resin binder. An over-molded blade and stainless-steel handle-mounting bolt creates a solid blade\/spine\/mount assembly. A single brass fastener secures the hardwood handle.\n\u003cbr\u003eMade of high-carbon steel, the blade is 9 1\/4\" long and 0.020\" thick, with a cut depth of about 1 9\/16\". The teeth, set 0.003\" per side, have a rake angle of 14° and an included angle of 60°. The blades have 14 or 20 rip-cut teeth per inch. The 14 tpi model is most efficient on stock thicker than 1\/2\"; the less aggressive cut of the 20 tpi version is best for stock under 1\/2\" thick.\n\u003cbr\u003eComfortable and well balanced, each saw is 14 1\/4\" long overall.\n\u003cbr\u003ePatented. Made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815191363859,"sku":"05T05-05","price":182.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05T05-05.jpg?v=1705989093"},{"product_id":"small-fine-tooth-cross-cut-saw-22tpi","title":"Veritas Small Fine-Tooth 22TPI Cross Cut Saw","description":"\u003cp\u003eOptimized for material 1\/2\" (12.7mm) and thinner, this saw is designed for fine joinery projects.The teeth are set at 0.003\" (0.076mm) per side and are filed with a 15° rake and a 60° included angle. They also have alternating 15° bevels that act as small knives to sever wood fibers. This blade geometry provides a fluid starting cut, followed by a smooth and accurate final cut, with almost no tear-out.\n\u003cbr\u003eMade of high-carbon steel, the 22 tpi blade is 9 1\/4\" (235mm) long and 0.020\" (0.5mm) thick, with a cut depth of about 1 9\/16\" (40mm). The molded spine incorporates stainless-steel powder for weight, glass fiber for stiffness, and an advanced polymer resin binder. The open-grip hardwood handle is comfortable in any hand, even small ones. The saw is 14 1\/4\" (362mm) long overall.\n\u003cbr\u003ePatented. Made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815191429395,"sku":"05T06-05","price":182.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05T06-05_2.jpg?v=1705989097"},{"product_id":"crosscut-carcass-saw-14tpi-veritas","title":"Veritas Crosscut Carcass Saw - 14 TPi","description":"\u003cp\u003eThese saws carry forward the same design principles we used to develop our innovative dovetail saws, adopting selected traits of traditional carcass saws and rendering them using innovative materials and modern manufacturing methods.\n\u003cbr\u003eTypically used to cut joints in drawer runners, dividers, and stretchers (the framework or carcass of a piece), they are well balanced, maneuverable, and scaled for smaller work than a tenon saw.\n\u003cbr\u003eAvailable in rip and crosscut versions. The 12 tpi rip saw has a 10° rake angle and an included angle of 60° for efficient cutting parallel to the grain. The 14 tpi crosscut saw has a rake angle of 15°, an included angle of 60°, and teeth filed with alternating 15° bevels so they sever wood fibers rather than tear them. The teeth on each have relatively minimal set, at only 0.003\" per side.\n\u003cbr\u003eEach saw has a molded spine that incorporates stainless-steel powder for weight, glass fiber for stiffness, and an advanced polymer binder. An over-molded blade and stainless-steel handle-mounting bolt create a solid blade\/spine\/mount assembly. A single brass fastener secures the hardwood handle. The open-grip handle, made larger than those of classic carcass saws, permits a comfortable, secure grip. The high-carbon steel blade, 11\" long and 0.02\" thick, has a cut depth of about 2 3\/8\". Each saw is 16 3\/8\" long overall and weighs just under a pound.\n\u003cbr\u003ePatented. Made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815191462163,"sku":"05T07-01","price":192.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05T07-01-crosscut-carcass-saw-14-tpi.jpg?v=1705989100"},{"product_id":"gents-saw-crosscut-22tpi","title":"Veritas Gents Crosscut Saw - 22TPi","description":"\u003cp\u003eGent's tools were originally developed for “gentleman's” tool kits, intended for those who wanted good-quality tools for occasional work, but didn't need full-size equipment.\n\u003cbr\u003eOur gent's saws have a 7 7\/8\" long high-carbon steel blade that is just 0.015\" thick with 0.003\" of teeth set per side. The 20 tpi rip saw has teeth with a 14° rake angle and a 60° included angle. The teeth on the 22 tpi crosscut saw have a rake angle of 15°, an included angle of 60° and have been filed with alternating 15° bevel angles so that they sever rather than tear wood fibers.\n\u003cbr\u003eBoth saws have a cut depth of 1 5\/8\". For strength and rigidity, the glass and stainless steel-filled polymer spine is molded over the blade and handle stud. The 4 1\/4\" long hardwood handle is secured with a brass nut.\n\u003cbr\u003eMade in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815191724307,"sku":"05T10-05","price":135.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05T10-05-crosscut-gent-s-saw-22-tpi.jpg?v=1705989103"},{"product_id":"crosscut-tenon-saw","title":"Veritas Crosscut Tenon Saw","description":"\u003cp\u003eVeritas Tenon Saws\n\u003cbr\u003eWeighing just under 1 1\/2 lb (650 grams) with 16\" (406mm) blades, these are the largest tenon saws in the Veritas line. This is the 12 teeth per inch (TPI) crosscut saw, but they are also available in 9 TPI rip tooth style. The blades are made from 0.024\" (0.6mm) thick high-carbon steel with 0.003\" (0.076mm) of set per side and a cut depth of nearly 4\" (100mm).\n\u003cbr\u003eThe tenon saw teeth on the crosscut saw have a 15° rake and have been filed with alternating 15° bevels so they sever wood fibres rather than tear them for precision work, fine and accurate cuts.\n\u003cbr\u003eEach tenon saw is well balanced, with a spine moulded from a mixture of stainless-steel powder for weight, glass fibre for stiffness and a polymer resin binder. The closed handle is configured for exceptional control for a saw of this size and weight, with a hardwood grip secured by a stainless-steel bolt and brass nut.\n\u003cbr\u003eThe tenon saw blade and handle-mounting bolt are moulded into the spine, creating a solid blade\/spine\/mount assembly.\n\u003cbr\u003eAll woodworkers need a fine tenon saw with supremely sharp teeth and so the Veritas hand saws are excellent value considering their ideal features, materials, and cutting ability. They're suitable for enthusiasts and experts alike.\n\u003cbr\u003eVeritas Tools are made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815191789843,"sku":"05T14-05","price":288.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05T14-05.jpg?v=1705989106"},{"product_id":"sanding-block-3-x-4-base-veritas","title":"Veritas Sanding Block","description":"\u003cp\u003eAlthough there are quite a few sanding blocks on the market, they are generally ho-hum; this is a very good one.\n\u003cbr\u003eThe hardwood body fits naturally in the palm of your hand without the need for a death grip. The felt-covered steel sole is flat but forgiving. Best of all, the four spring tips in the base automatically tension the sandpaper as you tighten the brass thumbscrew down. With a 3\" × 4\" base, it efficiently uses exactly 1\/6 of a sheet of sandpaper. Weighs 14 oz.\n\u003cbr\u003eDesigned and made in Canada.\u003c\/p\u003e","brand":"VERITAS","offers":[{"title":"Default Title","offer_id":47815191920915,"sku":"05Z14-01","price":81.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/05Z14-01-veritas-sanding-block.jpg?v=1705989115"},{"product_id":"lee-valley-bow-sander-small","title":"Lee Valley Small Bow Sander","description":"\u003cp\u003eFor working on curved forms, these tools offer a simple, effective way to sand contours evenly without digging in.\n\u003cbr\u003eDesigned to work with standard sanding belts, they keep the belt tensioned firmly between two ends of a sturdy fiberglass bow. You can bear down on the work, but with no rigid backing, the belt flexes easily to conform to curves. Large knobs at either end let you use a comfortable two-handed grip, helping prevent hand strain when sanding vigorously.\n\u003cbr\u003eThe small bow is about 250mm long. Each bow comes with one 2\" × 36\" (51mm x 914mm) 120 grit belt, but you can use any belt up to 51mm wide or abrasive strip in any grit, provided it is of suitable length (minimum 450mm for the small bow). You can also adjust the belt tension as needed – tighter for lightly curved surfaces, looser for pronounced contours. No tools are required to change the belt, so you can switch grits as needed to progress from shaping to final smoothing.\n\u003cbr\u003eLightweight and maneuverable, at less than 0.5kg, and permits a long stroke that lets you sand large areas quickly. Versatile tools, with uses ranging from boatbuilding and instrument making to turning and much more.\u003c\/p\u003e","brand":"LEE VALLEY","offers":[{"title":"Default Title","offer_id":47815197163795,"sku":"15Z01-01","price":47.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/15Z01-01-whiteBG.jpg?v=1705989183"},{"product_id":"lee-valley-bow-sander-large","title":"Lee Valley Large Bow Sander","description":"\u003cp\u003eFor working on curved forms, these tools offer a simple, effective way to sand contours evenly without digging in.\n\u003cbr\u003eDesigned to work with standard sanding belts, they keep the belt tensioned firmly between two ends of a sturdy fiberglass bow. You can bear down on the work, but with no rigid backing, the belt flexes easily to conform to curves. Large knobs at either end let you use a comfortable two-handed grip, helping prevent hand strain when sanding vigorously.\n\u003cbr\u003eThe large bow is about 400mm long. Each bow comes with one 2\" × 36 (51mm x 914mm) 120 grit belt, but you can use any belt up to 51mm wide or abrasive strip in any grit, provided it is of suitable length (minimum 610mm for the large bow). You can also adjust the belt tension as needed – tighter for lightly curved surfaces, looser for pronounced contours. No tools are required to change the belt, so you can switch grits as needed to progress from shaping to final smoothing.\n\u003cbr\u003eLightweight and maneuverable, at less than 0.5kg, and permits a long stroke that lets you sand large areas quickly. Versatile tools, with uses ranging from boatbuilding and instrument making to turning and much more.\u003c\/p\u003e","brand":"LEE VALLEY","offers":[{"title":"Default Title","offer_id":47815197294867,"sku":"15Z02-01","price":55.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/15Z01-02-whiteBG.jpg?v=1705989184"},{"product_id":"accordian-glue-bottles","title":"Lee Valley Accordian Glue Bottles","description":"\u003cp\u003eTwo 1 oz bottles and eight blunt needles, two each of gauges 14, 18, 20, and 22. Used for gluing in the same way as syringes. Excellent value.\n\u003cbr\u003eMade in USA.\u003c\/p\u003e","brand":"LEE VALLEY","offers":[{"title":"Default Title","offer_id":47815200178451,"sku":"25K07-45","price":15.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/25K07-45-set-of-accordion-bottles.jpg?v=1705989225"},{"product_id":"5-syringe-10-needle-set-5-x-18-5-x-20-gauge-veritas","title":"Lee Valley Glue Syringes","description":"\u003cp\u003eFor accurately applying glue in awkward spots, nothing beats a needle-tipped syringe. This set of five syringes with 10 blunt-end needles (five 18-gauge and five 20-gauge) is ideal for putting glue deep into cracks.\n\u003cbr\u003eFlushed after use, they will last indefinitely. Replacement needles are available separately.\n\u003cbr\u003eMade in USA.\u003c\/p\u003e","brand":"LEE VALLEY","offers":[{"title":"Default Title","offer_id":47815200211219,"sku":"25K07-31","price":29.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/25K07-31-5-syringe-set.jpg?v=1705989226"},{"product_id":"twist-n-seal-stopper-5-pack","title":"Lee Valley Twist-N-Seal Stopper (5 Pk)","description":"\u003cp\u003eThis clever reusable plug forms a lasting, airtight seal on plastic nozzles or tubes from 3\/32\" to 7\/16\" internal diameter. Made of a tough plastic composite, it inserts simply by pushing and turning. The fine screw-like threads deform the softer nozzle or tube material, so it grips securely but removes easily by unscrewing.\n\u003cbr\u003eDried glue or caulking does not adhere to the non-stick plastic. Far better than using a screw or tape (or even the cap supplied with most adhesives!). Package of five.\n\u003cbr\u003eMade in USA.\u003c\/p\u003e","brand":"LEE VALLEY","offers":[{"title":"Default Title","offer_id":47815200375059,"sku":"25K80-95","price":9.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/25K80-95-twist-n-seal-package-of-5.jpg?v=1705989230"},{"product_id":"cmt-saw-blade-216-x-30-x-36t-ind-thin-kerf","title":"CMT ITK Plus Rip and Crosscut Blade - 216mm","description":"\u003cp\u003e271.216.36M - Ultra ITK rip \u0026amp; crosscut blades allow you to produce excellent finish cuts in the shop, on the job site or wherever quality cuts are critical.\n\u003cbr\u003eWith Micrograin carbide teeth, anti-kickback design and Tri-metal brazing, these blades deliver high performance with a minimum of stock removal, meaning there's less stress on the blade and on your saw.\n\u003cbr\u003ePlease note: thin kerf blades will require modified riving knives on most table saws to suitably match the thinner kerf of the blade.\n\u003cbr\u003ePhoto shows a blade from the same category, indicating teeth type and overall look.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815200506131,"sku":"271-216-36M","price":53.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/271-216-36M.jpg?v=1702616055"},{"product_id":"cmt-saw-blade-216-x-30-x-48t-negative-rake","title":"CMT Crosscut Saw Blade - 216mm","description":"\u003cp\u003eExcellent crosscut on plywood.Excellent rip cut on plywood.Excellent crosscut on wood.Excellent rip cut on wood.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815203094803,"sku":"291-216-48M","price":93.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/291-216-48M.jpg?v=1702616180"},{"product_id":"cmt-saw-blade-216-x-30-x-64t-negative-rake","title":"CMT Fine Cut-Off Blade - 216mm","description":"\u003cp\u003eA great choice for use in a tablesaw or handheld saws for use with softwoods, and hardwoods especially exotic timbers, wood-based panels, one-side veneered, paper-based laminates.\n\u003cbr\u003eGood crosscut on plywood and melamine, and excellent crosscut on wood.\n\u003cbr\u003ePicture is indicative only of the blade.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815203258643,"sku":"292-216-64M","price":110.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/292-216-64M.jpg?v=1702616187"},{"product_id":"cmt-saw-blade-216-x-30-x-64t-non-ferrous-metal","title":"CMT Industrial Non-Ferrous Metal and Laminated Panel Blade - 216mm","description":"\u003cp\u003e• Excellent cut on all non-ferrous metals and PVC.\n\u003cbr\u003e• Excellent cut on two-sided melamine.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815203455251,"sku":"297-064-09M","price":139.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/297-064-09M.jpg?v=1702616201"},{"product_id":"dovetail-7-5deg-1-4x8-3-1-4-cmt","title":"CMT Dovetail Router Bit - 8.3mm Cut Length 1\/4\" Shank","description":"\u003cp\u003eFor centuries, the dovetail joint has been the sign of a craftsman, using the CMT Dovetail Router Bit they are possible for even the novice. Dovetails joints are not only beautiful to look at, but are also an incredibly strong joint. Whether it is through dovetails, half blind dovetails or sliding dovetails, these are an ideal way to achieve the look and functionality desired by so many woodworkers.\n\u003cbr\u003eShop tips: The first initial cut should be made to remove the bulk of the waste, with a second pass made to ensure all of the intended material is removed. Many jigs work in a way that the bit cannot be seen as the cut is being made, so it is easy to miss material. Before removing the workpiece, check to make sure the cut has been completed.\n\u003cbr\u003eDue to the profile of the bit, it is captive within the material, so is under a great deal of stress, especially when doing sliding dovetails. To reduce the amount of stress, removing a bulk of the waste using a straight bit or even saw blade on a tablesaw will reduce the amount of material that the router bit needs to remove.\n\u003cbr\u003eSafety tips: As the bit is captive within the timber, it needs to slide into and out of the timber in the same way. It should not be lifted out of a cut until it is free of the workpiece and jig, and only when the router has come to a complete stop.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815223443731,"sku":"818-064-11","price":50.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/818-064-11.jpg?v=1702616738"},{"product_id":"dovetail-8deg-1-4x1-4-1-4-cmt","title":"CMT Dovetail Router Bit - 6.35mm Cut Length \u0026 Diameter","description":"\u003cp\u003eFor centuries, the dovetail joint has been the sign of a craftsman, using the CMT Dovetail Router Bit they are possible for even the novice. Dovetails joints are not only beautiful to look at, but are also an incredibly strong joint. Whether it is through dovetails, half blind dovetails or sliding dovetails, these are an ideal way to achieve the look and functionality desired by so many woodworkers.\n\u003cbr\u003eShop tips: The first initial cut should be made to remove the bulk of the waste, with a second pass made to ensure all of the intended material is removed. Many jigs work in a way that the bit cannot be seen as the cut is being made, so it is easy to miss material. Before removing the workpiece, check to make sure the cut has been completed.\n\u003cbr\u003eDue to the profile of the bit, it is captive within the material, so is under a great deal of stress, especially when doing sliding dovetails. To reduce the amount of stress, removing a bulk of the waste using a straight bit or even saw blade on a tablesaw will reduce the amount of material that the router bit needs to remove.\n\u003cbr\u003eSafety tips: As the bit is captive within the timber, it needs to slide into and out of the timber in the same way. It should not be lifted out of a cut until it is free of the workpiece and jig, and only when the router has come to a complete stop.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815223509267,"sku":"818-065-11","price":47.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/818-065-11.jpg?v=1702616740"},{"product_id":"dovetail-8deg-8x9-5mm-1-4s-cmt","title":"CMT Dovetail Router Bit - 9.5mm Cut Length 8mm Diameter","description":"\u003cp\u003eFor centuries, the dovetail joint has been the sign of a craftsman, using the CMT Dovetail Router Bit they are possible for even the novice. Dovetails joints are not only beautiful to look at, but are also an incredibly strong joint. Whether it is through dovetails, half blind dovetails or sliding dovetails, these are an ideal way to achieve the look and functionality desired by so many woodworkers.\n\u003cbr\u003eShop tips: The first initial cut should be made to remove the bulk of the waste, with a second pass made to ensure all of the intended material is removed. Many jigs work in a way that the bit cannot be seen as the cut is being made, so it is easy to miss material. Before removing the workpiece, check to make sure the cut has been completed.\n\u003cbr\u003eDue to the profile of the bit, it is captive within the material, so is under a great deal of stress, especially when doing sliding dovetails. To reduce the amount of stress, removing a bulk of the waste using a straight bit or even saw blade on a tablesaw will reduce the amount of material that the router bit needs to remove.\n\u003cbr\u003eSafety tips: As the bit is captive within the timber, it needs to slide into and out of the timber in the same way. It should not be lifted out of a cut until it is free of the workpiece and jig, and only when the router has come to a complete stop.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815223542035,"sku":"818-081-11","price":55.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/818-081-11.jpg?v=1702616740"},{"product_id":"dovetail-8deg-9-5x1-2-1-4-cmt","title":"CMT Dovetail Router Bit - 12.7mm Cut Length 9.5mm Diameter","description":"\u003cp\u003eFor centuries, the dovetail joint has been the sign of a craftsman, using the CMT Dovetail Router Bit they are possible for even the novice. Dovetails joints are not only beautiful to look at, but are also an incredibly strong joint. Whether it is through dovetails, half blind dovetails or sliding dovetails, these are an ideal way to achieve the look and functionality desired by so many woodworkers.\n\u003cbr\u003eShop tips: The first initial cut should be made to remove the bulk of the waste, with a second pass made to ensure all of the intended material is removed. Many jigs work in a way that the bit cannot be seen as the cut is being made, so it is easy to miss material. Before removing the workpiece, check to make sure the cut has been completed.\n\u003cbr\u003eDue to the profile of the bit, it is captive within the material, so is under a great deal of stress, especially when doing sliding dovetails. To reduce the amount of stress, removing a bulk of the waste using a straight bit or even saw blade on a tablesaw will reduce the amount of material that the router bit needs to remove.\n\u003cbr\u003eSafety tips: As the bit is captive within the timber, it needs to slide into and out of the timber in the same way. It should not be lifted out of a cut until it is free of the workpiece and jig, and only when the router has come to a complete stop.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815223574803,"sku":"818-097-11","price":57.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/818-097-11.jpg?v=1702616741"},{"product_id":"dovetail-8deg-11-1x5-8-1-4-cmt","title":"CMT Dovetail Router Bit - 15.8mm Cut Length 11.1mm Diameter","description":"\u003cp\u003eFor centuries, the dovetail joint has been the sign of a craftsman, using the CMT Dovetail Router Bit they are possible for even the novice. Dovetails joints are not only beautiful to look at, but are also an incredibly strong joint. Whether it is through dovetails, half blind dovetails or sliding dovetails, these are an ideal way to achieve the look and functionality desired by so many woodworkers.\n\u003cbr\u003eShop tips: The first initial cut should be made to remove the bulk of the waste, with a second pass made to ensure all of the intended material is removed. Many jigs work in a way that the bit cannot be seen as the cut is being made, so it is easy to miss material. Before removing the workpiece, check to make sure the cut has been completed.\n\u003cbr\u003eDue to the profile of the bit, it is captive within the material, so is under a great deal of stress, especially when doing sliding dovetails. To reduce the amount of stress, removing a bulk of the waste using a straight bit or even saw blade on a tablesaw will reduce the amount of material that the router bit needs to remove.\n\u003cbr\u003eSafety tips: As the bit is captive within the timber, it needs to slide into and out of the timber in the same way. It should not be lifted out of a cut until it is free of the workpiece and jig, and only when the router has come to a complete stop.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815223607571,"sku":"818-111-11","price":57.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/818-111-11.jpg?v=1702616748"},{"product_id":"dovetail-14deg-1-2x1-2-1-cmt","title":"CMT Dovetail Router Bit - 12.7mm Cut Length 52.4mm Length","description":"\u003cp\u003eFor centuries, the dovetail joint has been the sign of a craftsman, using the CMT Dovetail Router Bit they are possible for even the novice. Dovetails joints are not only beautiful to look at, but are also an incredibly strong joint. Whether it is through dovetails, half blind dovetails or sliding dovetails, these are an ideal way to achieve the look and functionality desired by so many woodworkers.\n\u003cbr\u003eShop tips: The first initial cut should be made to remove the bulk of the waste, with a second pass made to ensure all of the intended material is removed. Many jigs work in a way that the bit cannot be seen as the cut is being made, so it is easy to miss material. Before removing the workpiece, check to make sure the cut has been completed.\n\u003cbr\u003eDue to the profile of the bit, it is captive within the material, so is under a great deal of stress, especially when doing sliding dovetails. To reduce the amount of stress, removing a bulk of the waste using a straight bit or even saw blade on a tablesaw will reduce the amount of material that the router bit needs to remove.\n\u003cbr\u003eSafety tips: As the bit is captive within the timber, it needs to slide into and out of the timber in the same way. It should not be lifted out of a cut until it is free of the workpiece and jig, and only when the router has come to a complete stop.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815223673107,"sku":"818-128-11","price":44.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/818-128-11.jpg?v=1702616749"},{"product_id":"dovetail-8deg-1-2x20-6-1-4-cmt","title":"CMT Dovetail Router Bit - 20.6mm Cut Length 12.7mm Diameter","description":"\u003cp\u003eFor centuries, the dovetail joint has been the sign of a craftsman, using the CMT Dovetail Router Bit they are possible for even the novice. Dovetails joints are not only beautiful to look at, but are also an incredibly strong joint. Whether it is through dovetails, half blind dovetails or sliding dovetails, these are an ideal way to achieve the look and functionality desired by so many woodworkers.\n\u003cbr\u003eShop tips: The first initial cut should be made to remove the bulk of the waste, with a second pass made to ensure all of the intended material is removed. Many jigs work in a way that the bit cannot be seen as the cut is being made, so it is easy to miss material. Before removing the workpiece, check to make sure the cut has been completed.\n\u003cbr\u003eDue to the profile of the bit, it is captive within the material, so is under a great deal of stress, especially when doing sliding dovetails. To reduce the amount of stress, removing a bulk of the waste using a straight bit or even saw blade on a tablesaw will reduce the amount of material that the router bit needs to remove.\n\u003cbr\u003eSafety tips: As the bit is captive within the timber, it needs to slide into and out of the timber in the same way. It should not be lifted out of a cut until it is free of the workpiece and jig, and only when the router has come to a complete stop.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815223705875,"sku":"818-129-11","price":47.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/818-129-11.jpg?v=1702616751"},{"product_id":"dovetail-18deg-1-2x10-3-1-4-cmt","title":"CMT Dovetail Router Bit - 10.3mm Cut Length 12.7mm Diameter","description":"\u003cp\u003eFor centuries, the dovetail joint has been the sign of a craftsman, using the CMT Dovetail Router Bit they are possible for even the novice. Dovetails joints are not only beautiful to look at, but are also an incredibly strong joint. Whether it is through dovetails, half blind dovetails or sliding dovetails, these are an ideal way to achieve the look and functionality desired by so many woodworkers.\n\u003cbr\u003eShop tips: The first initial cut should be made to remove the bulk of the waste, with a second pass made to ensure all of the intended material is removed. Many jigs work in a way that the bit cannot be seen as the cut is being made, so it is easy to miss material. Before removing the workpiece, check to make sure the cut has been completed.\n\u003cbr\u003eDue to the profile of the bit, it is captive within the material, so is under a great deal of stress, especially when doing sliding dovetails. To reduce the amount of stress, removing a bulk of the waste using a straight bit or even saw blade on a tablesaw will reduce the amount of material that the router bit needs to remove.\n\u003cbr\u003eSafety tips: As the bit is captive within the timber, it needs to slide into and out of the timber in the same way. It should not be lifted out of a cut until it is free of the workpiece and jig, and only when the router has come to a complete stop.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815223738643,"sku":"818-132-11","price":47.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/818-132-11.jpg?v=1702616758"},{"product_id":"dovetail-14deg-1-2x1-2-1-cmt-818-130-11","title":"CMT Dovetail Router Bit - 12.7mm Cut Length 62mm Length","description":"\u003cp\u003eFor centuries, the dovetail joint has been the sign of a craftsman, using the CMT Dovetail Router Bit they are possible for even the novice. Dovetails joints are not only beautiful to look at, but are also an incredibly strong joint. Whether it is through dovetails, half blind dovetails or sliding dovetails, these are an ideal way to achieve the look and functionality desired by so many woodworkers.\n\u003cbr\u003eShop tips: The first initial cut should be made to remove the bulk of the waste, with a second pass made to ensure all of the intended material is removed. Many jigs work in a way that the bit cannot be seen as the cut is being made, so it is easy to miss material. Before removing the workpiece, check to make sure the cut has been completed.\n\u003cbr\u003eDue to the profile of the bit, it is captive within the material, so is under a great deal of stress, especially when doing sliding dovetails. To reduce the amount of stress, removing a bulk of the waste using a straight bit or even saw blade on a tablesaw will reduce the amount of material that the router bit needs to remove.\n\u003cbr\u003eSafety tips: As the bit is captive within the timber, it needs to slide into and out of the timber in the same way. It should not be lifted out of a cut until it is free of the workpiece and jig, and only when the router has come to a complete stop.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815223771411,"sku":"818-130-11","price":44.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/818-130-11.jpg?v=1702616751"},{"product_id":"dovetail-10deg-1-2x16mm-1-4-cmt","title":"CMT Dovetail Router Bit - 10°","description":"\u003cp\u003eFor centuries, the dovetail joint has been the sign of a craftsman, using the CMT Dovetail Router Bit they are possible for even the novice. Dovetails joints are not only beautiful to look at, but are also an incredibly strong joint. Whether it is through dovetails, half blind dovetails or sliding dovetails, these are an ideal way to achieve the look and functionality desired by so many woodworkers.\n\u003cbr\u003eShop tips: The first initial cut should be made to remove the bulk of the waste, with a second pass made to ensure all of the intended material is removed. Many jigs work in a way that the bit cannot be seen as the cut is being made, so it is easy to miss material. Before removing the workpiece, check to make sure the cut has been completed.\n\u003cbr\u003eDue to the profile of the bit, it is captive within the material, so is under a great deal of stress, especially when doing sliding dovetails. To reduce the amount of stress, removing a bulk of the waste using a straight bit or even saw blade on a tablesaw will reduce the amount of material that the router bit needs to remove.\n\u003cbr\u003eSafety tips: As the bit is captive within the timber, it needs to slide into and out of the timber in the same way. It should not be lifted out of a cut until it is free of the workpiece and jig, and only when the router has come to a complete stop.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815223836947,"sku":"818-133-11","price":50.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/818-133-11.jpg?v=1702616759"},{"product_id":"dovetail-14deg-14-2x9-5-1-4-bearing-cmt","title":"CMT 14° Dovetail Router Bit with Bearing","description":"\u003cp\u003eFor centuries, the dovetail joint has been the sign of a craftsman, using the CMT Dovetail Router Bit they are possible for even the novice. Dovetails joints are not only beautiful to look at but are also an incredibly strong joint. Whether it is through dovetails, half blind dovetails or sliding dovetails, these are an ideal way to achieve the look and functionality desired by so many woodworkers.\n\u003cbr\u003eShop tips: The first initial cut should be made to remove the bulk of the waste, with a second pass made to ensure all the intended material is removed. Many jigs work in a way that the bit cannot be seen as the cut is being made, so it is easy to miss material. Before removing the workpiece, check to make sure the cut has been completed.\n\u003cbr\u003eDue to the profile of the bit, it is captive within the material, so is under a great deal of stress, especially when doing sliding dovetails. To reduce the amount of stress, removing a bulk of the waste using a straight bit or even saw blade on a tablesaw will reduce the amount of material that the router bit needs to remove.\n\u003cbr\u003eSafety tips: As the bit is captive within the timber, it needs to slide into and out of the timber in the same way. It should not be lifted out of a cut until it is free of the workpiece and jig, and only when the router has come to a complete stop.\n\u003cbr\u003eUse with our CT-DTJ300 blind dovetail jig as well as our older models, WDV-1N and WDV-2.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815223869715,"sku":"818-142-11B","price":57.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/818-142-11B.jpg?v=1702616759"},{"product_id":"dovetail-14deg-1-2x1-2-1-cmt-818-628-11","title":"CMT Dovetail Router Bit - 12.7mm Cut Length 63.5mm Length","description":"\u003cp\u003eFor centuries, the dovetail joint has been the sign of a craftsman, using the CMT Dovetail Router Bit they are possible for even the novice. Dovetails joints are not only beautiful to look at, but are also an incredibly strong joint. Whether it is through dovetails, half blind dovetails or sliding dovetails, these are an ideal way to achieve the look and functionality desired by so many woodworkers.\n\u003cbr\u003eShop tips: The first initial cut should be made to remove the bulk of the waste, with a second pass made to ensure all of the intended material is removed. Many jigs work in a way that the bit cannot be seen as the cut is being made, so it is easy to miss material. Before removing the workpiece, check to make sure the cut has been completed.\n\u003cbr\u003eDue to the profile of the bit, it is captive within the material, so is under a great deal of stress, especially when doing sliding dovetails. To reduce the amount of stress, removing a bulk of the waste using a straight bit or even saw blade on a tablesaw will reduce the amount of material that the router bit needs to remove.\n\u003cbr\u003eSafety tips: As the bit is captive within the timber, it needs to slide into and out of the timber in the same way. It should not be lifted out of a cut until it is free of the workpiece and jig, and only when the router has come to a complete stop.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815223902483,"sku":"818-628-11","price":44.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/818-628-11.jpg?v=1702616761"},{"product_id":"dovetail-14deg-19x19mm-1-2s-cmt","title":"CMT Dovetail Router Bit - 19mm Cut Length 19mm Diameter","description":"\u003cp\u003eFor centuries, the dovetail joint has been the sign of a craftsman, using the CMT Dovetail Router Bit they are possible for even the novice. Dovetails joints are not only beautiful to look at, but are also an incredibly strong joint. Whether it is through dovetails, half blind dovetails or sliding dovetails, these are an ideal way to achieve the look and functionality desired by so many woodworkers.\n\u003cbr\u003eShop tips: The first initial cut should be made to remove the bulk of the waste, with a second pass made to ensure all of the intended material is removed. Many jigs work in a way that the bit cannot be seen as the cut is being made, so it is easy to miss material. Before removing the workpiece, check to make sure the cut has been completed.\n\u003cbr\u003eDue to the profile of the bit, it is captive within the material, so is under a great deal of stress, especially when doing sliding dovetails. To reduce the amount of stress, removing a bulk of the waste using a straight bit or even saw blade on a tablesaw will reduce the amount of material that the router bit needs to remove.\n\u003cbr\u003eSafety tips: As the bit is captive within the timber, it needs to slide into and out of the timber in the same way. It should not be lifted out of a cut until it is free of the workpiece and jig, and only when the router has come to a complete stop.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815224000787,"sku":"818-691-11","price":71.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/818-691-11.jpg?v=1702616767"},{"product_id":"dovetail-8deg-20-6x11-4-1-2-cmt","title":"CMT Dovetail Router Bit - 31.7mm Cut Length 20.6mm Diameter","description":"\u003cp\u003eFor centuries, the dovetail joint has been the sign of a craftsman, using the CMT Dovetail Router Bit they are possible for even the novice. Dovetails joints are not only beautiful to look at, but are also an incredibly strong joint. Whether it is through dovetails, half blind dovetails or sliding dovetails, these are an ideal way to achieve the look and functionality desired by so many woodworkers.\n\u003cbr\u003eShop tips: The first initial cut should be made to remove the bulk of the waste, with a second pass made to ensure all of the intended material is removed. Many jigs work in a way that the bit cannot be seen as the cut is being made, so it is easy to miss material. Before removing the workpiece, check to make sure the cut has been completed.\n\u003cbr\u003eDue to the profile of the bit, it is captive within the material, so is under a great deal of stress, especially when doing sliding dovetails. To reduce the amount of stress, removing a bulk of the waste using a straight bit or even saw blade on a tablesaw will reduce the amount of material that the router bit needs to remove.\n\u003cbr\u003eSafety tips: As the bit is captive within the timber, it needs to slide into and out of the timber in the same way. It should not be lifted out of a cut until it is free of the workpiece and jig, and only when the router has come to a complete stop.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815223968019,"sku":"818-706-11","price":71.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/818-706-11.jpg?v=1702616769"},{"product_id":"small-rail-and-sash-bit","title":"CMT Small Rail \u0026 Sash Bit","description":"\u003cp\u003eThese bits allow you to make true divided light doors for fine furniture and cabinets as well as sash bar windows; and stile and rail constructions. The glazing bar ovolo bits are bearing-guided to enable curved frames to be moulded. Cove bits can be used to produce easy-to-pull drawer handles. A = 855-307-11M B = 855-307-11F\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815229702419,"sku":"855-307-11F","price":94.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/855-307-11F.jpg?v=1705989797"},{"product_id":"finger-pull-bit-47-6x22-2-1-2-cmt","title":"CMT Finger Pull Bit 47.6X22.2 1\/2\"","description":"\u003cp\u003eUse a CMT finger pull bit to make an attractive and ergonomic wooden handle. Allows you to make an inset handle (using to the bit to cut a channel through your workpiece) or the bit can be used to make an edge cut (with the handle lip exposed).\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815230095635,"sku":"855-601-11","price":139.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/855-601-11.jpg?v=1702616965"},{"product_id":"finger-pull-bit","title":"CMT Finger Pull Router Bit","description":"\u003cp\u003eAn alternative to drawer and cabinet door handles, is CMT’s Finger Pull Router Bit. Simply use the bit to rout a looking and functional handle with the door\/drawer front either flat on the router table or vertical against the fence.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815230259475,"sku":"855-602-11","price":82.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/855-602-11.jpg?v=1702616966"},{"product_id":"window-sill-and-finger-bit-sml-1-2s-cmt","title":"CMT Window Sill and Finger Pull Router Bit - Small","description":"\u003cp\u003e855.804.11 - Designed originally to shape the edges of window sills, these bits also can be used to create finger pulls on the edges of doors and drawers.\n\u003cbr\u003eUsed in a router table or with a guide, or jig.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815230357779,"sku":"855-804-11","price":105.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/855-804-11.jpg?v=1702616972"},{"product_id":"moulding-bit-41mmcut-1-2s-cmt","title":"CMT Moulding Bit 41mm cut 1\/2\" Shank","description":"\u003cp\u003eTraditionally-styled face moulding bit that is perfect for mouldings; architraves and other decorative edge pieces.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815230456083,"sku":"855-902-11","price":139.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/855-902-11.jpg?v=1702616974"},{"product_id":"entry-and-interior-door-router-bit-set-1-2s-cmt","title":"CMT 2 Piece Entry Door Router Bit Set","description":"\u003cp\u003e855.806.11 - These bits from CMT allow you to create tongue and groove joints and produce entry and passage doors with minimal effort.\n\u003cbr\u003eSolid timber doors have a far nicer feel about them than a hollow core door, provide that nice thud when closed as well as adding more over all security.\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":47815230554387,"sku":"855-806-11","price":359.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/2727\/5283\/files\/855-806-11.jpg?v=1702616976"}],"url":"https:\/\/mycarbateflash.com\/collections\/box-making-tools.oembed?page=3","provider":"Carbatec","version":"1.0","type":"link"}